LokPilot 5 Fx DCC Funktionsdecoder PluX22 NEM658The LokPilot 5 Fx DCC is a function decoder without a motor output and therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its properties and also the basic properties of all other LokPilot 5 decoders, but is a pure DCC decoder. The LokPilot 5 Fx DCC is supplied in three versions: In addition to the "classic" version with an 8-pin NEM 652 cable harness, a version for the 21MTC

LokPilot 5 Fx function decoder DCC/MM/SX 8-pin NEM652The LokPilot 5 Fx is a function decoder without a motor output and is therefore perfect for installation in control cars or function models. Because it speaks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital centers. It shares its flexible function key assignment and the various light effects with the other LokPilot 5 decoders from ESU.The LokPilot 5 Fx is supplied in three versions: In addition to t

The LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoder with a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm). It is used in all vehicles of nominal sizes N to H0 that do not have an engine output, but should still be able to switch light effects. LokPilot 5 Fx micro decoders are always offered with an 8-pin interface. Operating modes: The LokPilot 5 Fx micro is a real multi-protocol decoder. It masters the

Sound box for Doehler & Haass loudspeaker 1511, two versions in different heights.

The 380mm long, 15mm wide wagon interior lighting with the article number 50703 is intended for use in track-1 vehicles. It carries both white and yellow LEDs, which are separately adjustable in brightness. This allows you to set the desired color for the first time. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. Thanks to the digital interface (21MTC), a function decoder can be retrofitted at any time.

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. Operating modes: The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters al

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoder with a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm). It is used in all vehicles of nominal sizes N to H0 that do not have an engine output, but should still be able to switch light effects. LokPilot 5 Fx micro decoders are always offered with an 8-pin interface. Operating modes: The LokPilot 5 Fx DCC “only” speaks the DCC protocol, but can also be aut

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

The Mobile Control Pro is ESU's latest answer to the question of how to combine the advantages of smartphone technology with the needs of model railway control. The Mobile Control Pro is essentially a compact Android-based tablet equipped with controls for controlling your locomotives and magnetic accessories. The connection to the digital command station is established exclusively wirelessly via Wi-Fi. A specially designed app by ESU can communicate directly with a variety of digital command st

6-pin pin header NEM651 for converting to a F type

Function Decoder, 10.5 x 8 x 2.2 mm, 0.7 A, 6 function outputs, NEM651 6-pin pin header.

Miniature sound decoder, 6-pin interface NEM651 (2 x rail, 2 x motor, common plus, ground, 4 FA, 2 x speakers), 19 x 7.8 x 2.8 mm, audio 1 W, 0.7 A.

MN340C digital decoder 1.2A 21MTC. 8 FA FA3-FA6 preconfigured as logic level outputs (VHDM standard), connection for 15 V energy storage on solder pads (unlimited capacity).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These simil

6-pin socket strip in grid 1.27 mm, as a mating plug for Decoder with 6-pin pin header (... n, ... f) to pluggle the Decoder in locomas without interface and thus easy to make interchangeable.

Sational Setup Module Stone in track sections equipment, i.: 8 Connections for track sections (up to 8 A, HLU, occupation message, etc.), 16 inputs (sensors, light barriers, contact tracks, ...). Included: approx. 2m 20pol ribbon cable incl. 1x 20pol Crimp plug, 4x 3pol plug Kl., 3pol plug Gr., 2pol plug, instructions adsfsdaf

Economy basic device Digital Center DCC

The LokSound 5 Fx is a special feature within the LokSound family: It has no motor output and is specially designed for use in control cars or power cars that require a sound but do not have a model drive themselves. By omitting the motor part, it can still offer all the sound features of the other LokSound 5 members on a size of only 21.5mm x 15.5mm.LokSound 5 Fx decoders are offered with an 8-pin interface according to NEM652 or a 21MTC interface and always come with an 11 x 15 mm "sugar cube"

This adapter board, measuring 54.0 mm x 17.0 mm, features an ESU PowerPack on board. Although the capacitors projecting at the front and rear result in a total length of 70 mm, this adapter board is ideal for converting many American H0 locomotives from Atlas or Athearn, where it replaces the original circuit board. In addition to connection pads for the motor and track, there are also pads for the function outputs AUX1, AUX2, AUX3, AUX4, AUX5, AUX6, AUX7, and AUX8. The series resistors for the

With this expansion board you can elegantly extend your LokPilot V4.0 or LokSound V4.0 decoder (with 21MTC interface!): Simply plug the decoder onto the device and use 8 additional function outputs (AUX3 to AUX10) for lighting effects, coupling etc. You can also connect 4 RC servos. The necessary 5V voltage is also provided. The highlight of the module is the control electronics for clocked smoke generators: Simply install an ESU smoke generator (from the BR 215) in your locomotive and let it ge

Sound box for Doehler & Haass loudspeaker 1308, two versions in different heights.

Sound Decoder, NEXT18 interface NEM 662, 15 x 9.5 x 3.3 mm, audio 1 W, 0.7 A.

ELKOS for Decoders of Category 2 (ie with direct energy storage connection), 15 V variant, usually several elkos are connected in parallel: at least 3 recommended, with MX Decoders up to 10 - results in maximum capacity of 6800 ?F, at MS Decoders unlimited).Content: 20 x ELKO 2200 ?F / 16 V, 10 x 20 mm (change to ELKOS with higher energy density when availability possible).