An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

The bigger the speaker, the better the sound. For this reason, ESU offers loudspeakers in various sizes. One of them will definitely fit into your locomotive. If there is not enough space, you can also install the loudspeaker in a "ghost car" directly behind the locomotive.If you are not sure which speaker fits in your model, we generally recommend opening the locomotive and measuring it yourself with a ruler.Speaker 15mm x 11mm, 8 OhmWhen choosing the speaker, the type of decoder used is crucia

Rectangular loudspeaker, 9 x 16 x 5 mm, 8 ohms / 1 W, integrated resonance chamber.

Rectangular loudspeaker, 9 x 16 x 8 mm, 8 ohms / 1 W, integrated resonance chamber.

Rectangular loudspeaker, 12 x 16 x 5.5 mm, 8 ohms / 1 W, no resonance chamber required.

Function sound decoder for control cars and motorless power cars, 21 x 15 x 3.6 mm, 1.0 A, 10 function outputs, PluX-22, speaker output 3 watts / 4-8 ohms, 16 BIT sound, energy storage directly connectable.

Function sound decoder for control cars and motorless power cars, 21 x 15 x 3.6 mm, 1.0 A, 10 function outputs, NEM-652, speaker output 3 watts / 4-8 ohms, 16 BIT sound, energy storage directly connectable.

Function sound decoder for control cars and motorless power cars, 21 x 15 x 3.6 mm, 1.0 A, 10 function outputs, 11 stranded wires, speaker output 3 watts / 4-8 ohms, 16 BIT sound, energy storage directly connectable.

Single soft Decoder, 19 x 11 x 3.5 mm, 0.8 A (tip 2.5).The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in drive housing, for example from LGB turns. All drive types for soft and shape signals are supported by double coils, motors and EPL.

Decoder MX623 with strands, 20 x 8.5 x 3.5 mm, 0.8 A, 4 function outputs, with SUSI.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered driving (without Decoder re

Sound Decoder lane 0, 34 pins on double pin strips, 50 x 23 x 13 mm, audio 2 x 3 W, 4 A.

MN250 digital decoder 0,2A 11 stranded wires. Wired variant of the MN250, 11 connecting wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same driving behavior, the same mapping,

ESU 59315 – LokPilot 5 L DCC/MM/SX/M4, Pinheader with adapter

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

Model: HO scale. H / V signal system distant signal with 4 lights (yellow / green / yellow / green) of the DB. Fine scale product with LED. Structure and railing made of brass, fine details made of 3D-printed material. Resistors up to 16 V (direct current) are included.

Model: HO gauge. The satellites are used to locate the vehicle. By determining the transit time of the ultrasonic signal from the vehicle to all satellites, the position of the vehicle can be determined to an accuracy of at least 10 mm. Depending on the size of the system, at least 3 satellites are required for fully automatic Car System Digital operation.

LokPilot 5 Fx function decoder DCC/MM/SX PluX22 NEM658The LokPilot 5 Fx is a function decoder without a motor output and is therefore perfect for installation in control cars or function models. Because it speaks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital centers. It shares its flexible function key assignment and the various light effects with the other LokPilot 5 decoders from ESU.The LokPilot 5 Fx is supplied in three versions: In addition to

A Plux22 (NEM658) DCC decoder suitable for models with a Plux22 DCC decoder socket.

Decoder Next18 NEM 662 - e.g. for E77, BR 42, BR 52. 14.2 x 9.2 x 3 mm

The new adapter board for decoders with PluX22 interface is suitable for anyone who wants to quickly digitize their locomotives and equip them with many functions quickly and without much soldering. The adapter board with the compact dimensions of 32.5mm x 15.5mm is additionally equipped with a break-off fastening strap. All outputs according to VHDM or NEM standard are available as solder connections. Already soldered connection cables with approx. 20 cm length for the most important contacts e

ESU 50119 Ecos Netzteil

Quick Loadboard for many Decoders

MN160 digital decoder 0.5A 7 6-pin NEM651 interface at right angles. Dimensions: 13 x 7.5 x 1.6 mm; single-sided assembly. Version of the MN160 with 6-pin pins at right angles: 7 free wires (2x motor, 2x track, front light (FA0v), rear light (FA0r), common positive pole).Zimo non-sound decoders are technologically equivalent to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product