The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility is rewarded with a lower price. LokPilot 5 decoders are offered with all common interfaces. Operating modes: The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®,

Permanent magnet, for Märklin® 3015, ET800, ST800, Spur 1 all-electric motors. For the conversion of old Märklin® all-electric motors you need a permanent magnet. It replaces the previous field winding and helps your old locomotives in conjunction with a LokSound or LokPilot decoder to a handling that you would never have expected the locomotive! In total, there are four different magnets, which is needed exactly depends on the anchor type. The number of the anchor can be found in the spare part

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color blue.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color yellow.

Decoder Update Device and Sound Charging Device (2 x 16 Characters) Software Update and Sound Loading from the USB Stick or Computer, Sound Loading Also via SUSI, Test Operation (Driving, Turning Functions) Included: Plug, USB stick with operating instructions, Susikab.

ESU PowerPack MiniXS can be connected to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic) and reliably supplies your locomotive with energy when driving over dirt spots and long switch routes.With the help of its energy storage (with 6 x 0.22 Farad capacity), both the noise and the light and motor functions are buffered, ensuring that your models can continue to drive without power for up to 1.5 seconds, depending on power consumption. This extremely flat module is in

The ESU PowerPack Midi can be connected to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic) and reliably supplies your locomotive with energy when driving over dirt spots and long switch routes.With the help of its energy storage (with 6x1 Farad capacity), both the noise and the light and motor functions are buffered, ensuring that your models can continue to drive without power for up to 3 seconds, depending on power consumption.The PowerPack Midi, which is equipped

Nouvelle génération de plaques de distribution.Avec 2 x 20 sorties, cette solution de distribution innovante offre une flexibilité maximale pour un effort minimal. Connexion jusqu'à 24 V / 8 A.Serrage des câbles sans outil – pour une installation rapide et sûre en quelques secondes. Conception compacte – gain de place et montage simplifié Le câblage n'a jamais été aussi simple.

The 21MTC adapter board is suitable if you want to digitize a locomotive without an interface, but do not want to freely wire the decoder or use more than 4 function outputs on your LokPilot or LokSound decoder. This adapter board mimics the typical design of the Märklin® 6090x decoder and can be installed wherever this place would be. The decoder with 21MTC interface is simply plugged onto the board. On the output side, this adapter already offers soldered cables (approx. 20 cm in length) for a

Decoder MX623P12 with 12-pin PLUX12 interface NEM658, 20 x 8.5 x 3.5 mm, 0.8 A, 4 function outputs, with SUSI.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered d

Miniature Sound Decoder, NEM 652 8-pin interface, 19 x 8.6 x 2.9 mm, audio 1 W, 0.7 A.

With this very affordable entry-level soldering station, you acquire a versatile tool for all hobby and laboratory soldering tasks. The temperature can be adjusted via a rotary knob. The LED on the control panel indicates the operating status of the soldering station.Scope of delivery: Soldering station with soldering stand, soldering iron including soldering tip, 1 instruction manual.Technical data: Infinitely variable temperature setting from 100°C to 450°C, operation via Europlug at 230V, pow

GER: PSD XP Sound TKt48 PKP PluX22 + Lautsprecher

LokPilot 5 Fx DCC Funktionsdecoder 8-pin NEM652The LokPilot 5 Fx DCC is a function decoder without a motor output and therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its properties and also the basic properties of all other LokPilot 5 decoders, but is a pure DCC decoder. The LokPilot 5 Fx DCC is supplied in three versions: In addition to the "classic" version with an 8-pin NEM 652 cable harness, a version for the 21MTC

Z21 DETECTOR x16

Decoder MX635 with strands, 26 x 15 x 3.5 mm, 1.8 A, 10 function outputs, connection for energy storage 16V (arbitrary capacity, also goldcap), semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A) .General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming t

Decoder MX623R with 8-pin interface NEM652 on wires, 20 x 8.5 x 3.5 mm, 0.8 A, 4 function outputs, with SUSI.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered dr

Prefabricated module made of 6 series-connected mini-gold caps in Lang form (six series) for MS Decoder of Category 2 (ie with direct energy storage connection), e.g. MS450, MS440.Not allowed for MX Decoder because charging transistor is not sufficiently powerful.Content: 5 x Mgolang Mini-Gold Cap Module 50,000 ?F / 16 V, 26.5 x 4.2 x 14 mm.

Vehicle decoder DHSP10A-1 for SX1, SX2, DCC and MM with ribbon cable for NEM 651 (recommended for Minitrix).Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capac

Vehicle decoder DHSP10A--0 for SX1, SX2, DCC and MM without connecting wires.Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capacitor voltage 16 VCapacitor capa

Vehicle decoder DHSP10A-4 for SX1, SX2, DCC and MM. For the 6-pin interface (recommended for NEM 651).Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capacitor v

Vehicle decoder DHSP10A-3 for SX1, SX2, DCC and MM with connecting wires, length approx. 145 mm.Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capacitor voltage

Vehicle decoder DHSP10A-2 for SX1, SX2, DCC and MM with connection cable for NEM 651, length approx. 35 mm (recommended for Fleischmann).Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface