Z21 digital control centre

Märklin mSD3 PluX22 SoundDecoder

Vehicle decoder DH10C 2nd generation for SX1, SX2, DCC and MM with 6 connection wires, length approx. 145 mm.Operating mode SX1, SX2, DCC, MM, DC-analogDimensions [mm] 12.7 * 8.9 * 1.4Total load 1.5 AMax. Motor current 1.5 AMax. Driving voltage 30 VFunction outputs light: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 300 mA eachFunction outputs: AUX5, AUX6 unamplified *)With SUSI interface (if AUX5 / AUX6 deactivated)*) Unamplified f

Mobile Station

Sound Kit for TRAXX

Universal usage. Powerful and quiet drive unit in flat design with slowly swinging drive plate, ideal for the opening and closing of doors. The included decoder is integrated as component inside the cable which makes the drive extra compact. It recognizes Märklin-Motorola and DCC format and is able to feedback required theoretical and actual position by RailCom to appropriate digital command station, e.g. Viessmann Commander item 5320. End position, speed and motion characteristics are configura

Doehler & Haass DH22B-3 vehicle decoder with pigtailsOperating mode SX1, SX2, DCC, MM, DC analog, AC analogDimensions [mm] (under reserve) 20.7 * 15.8 * 5.2Total load capacity 2.0 AMax motor current 2.0AMax. driving voltage 30 VSwitching voltage with AC-analogue max. 45 V peak = 30 V rms.LV, LR (dimmable) each 150 mAAUX1, AUX2 (dimmable) each 300 mAAUX3, AUX4 each 1.0AAUX5, AUX6 each 1.0AAUX7 1.0AAUX8 unamplifiedwith SUSI interfaceProduct features and functionsFor optional operation with a conve

Vehicle function decoder FH16A for SX1, SX2, DCC and MM. For optional operation with conventional DC controller, digital systems according to SelecTRIX 1 and 2 or according to DCC format. Switching between analogue and digital operation takes place automatically. In digital mode, the last programmed system is used (it is not switched over automatically!).SelecTRIX 1 31 speed steps, 100 addressesSelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functionsDCC Short addresses (1-127), lon

Loudspeaker PIKO ICE4

Sound box small transparent for LS0813S.

Universal usage. Outer diameter: 0,6 mm.

Universal usage. To insulate joints and to mark cables. Contracts strongly under influence of heat, hot air. Length 40cm, diameter 1,2mm.

Decoder for switching on and off continuous currents for light signals, traction current, lighting, motors or accessory items. The item is compatible with the Commander, Märklin Digital and Intellibox devices. There are four separately controllable 1xUM changeover switches, each with a load of up to 2 A. The coding switch for entering the decoder address is freely accessible from the outside. The control is possible through a separate ring line or directly from the track.

Universal usage. Decoder is multi protocol for DCC- and Märklin-Motorola-format. Equipped with 4 powerful relays with one double-pole double-throw contact and controls 2 servos. Features: 4 separate DPDT outputs, potential free, bistable outputs, switching position is maintained even without supply voltage. Supply out of the track signal, steady current up to 5 A each output. LEDs at the output indicate the switching command, track input, programming on the programming track, programming on the

Universal usage. Same as item-No. 5231, single track decoder but for a Märklin C-track, three-way turnout. Controls 2 drives. Decoder can be controlled by loc addresses and can thus be used for driving devices unable to address switching decoders (such as the early Mobile Station and Roco Lokmäuse). Suitable for Märklin-Motorola, NMRA-DCC and Märklin systems.

Universal usage. Compatible with Viessmann Commander item-No. 5300, Märklin digital systems (Märklin-Interface and Memory), Uhlenbrock Intellibox and Fleischmann Twin-Center. The 8 inputs of the decoder can be connected directly to the rail segments and are suitable for displaying the occupancy of the segments or to trigger Märklin Memory- or Intellibox. IB-switch functions and routes in the commander are directly connectable to the controlled track sections. The integrated electronic sensors ca

Universal usage. Decoder to switch on-/off continuous current for colour light signals, traction current, lighting, motors or accessories. Compatible with Viessmann Commander, Märklin Digital and Uhlenbrock Intellibox. There are 4 different, independent and separately controlled switches each 1 x UM, up to 2 A. The code switch for entering the decoder address is externally accessible. Control by separate ring Line or directly by rail track.

Universal usage. Functions same as Motorola digital decoder item-No. 5211, without box. Instead of plug-in points, this version provides good value for money soldering conductor pads. 8 impulse outputs to control 4 magnetic items with double spool drive. The coding switch to adjust 80 possible decoder addresses is external approachable. E-socket for injection of switched current by separate trafo. Thereby a safe switching of the points and signals is guaranteed even a lot of trains are running a

Model: HO gauge DC. Power supply for the 73410 and 73411 retrofit interior lighting consisting of two sliding springs for electrical connection. Can be used for four-axle passenger coaches with asymmetrical bogie mounting. The 73400 and 73401 retrofit interior lighting can also be operated with this power supply.

USB switching power supply 5 watts

Unlock Code z21

Z21 CAN HUB

XP 5.1 8-pin Sound decoder Blank

XP 5.1 Sound decoder Blank