Decoder Next18 (18 pins), 1A.

Model: HO gauge. Coach lighting with maintenance free, power-saving, bright LEDs with integrated multi protocol decoder (Motorola/DCC). Brightness adjustable by CVs and potentiometer. Can be used in any coach of all manufacturers designed to be equipped with lighting. By shortening the circuit board, it can be adapted to various waggon lengths. Integrated flickering protection for constant light even with short interruptions of the voltage supply, additional capacitors/power packs can be connect

Directional Light Plug-Hobby Locos

Universal usage. To insulate joints and to mark cables. Contracts strongly under influence of heat, hot air. Length 40cm, diameter 1,2mm.

This new speaker module fits wherever 20mm x 40mm rectangular speakers were previously installed. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves significantly improved bass reproduction and achieves a considerable sound pressure even in the highs and mids. The module is particularly suitable for diesel or steam locomotives where contemporary bass reproduction is important. The speaker fits perfectly with our LokSound

This loudspeaker module is suitable for large tenders with gauge H0 or OO or models with gauge 0. Its built-in passive radiator, in conjunction with the built-in broadband speaker, results in good bass reproduction without neglecting the highs and mids. Especially for diesel or steam locomotives, this module is a real alternative for those who like deep bass but don't need extreme volume. The speaker fits perfectly with our LokSound 5 or LokSound 5 L decoders.

Z21 signal DECODER

120 Volt Transformer. 32 VA. UL tested

Block section module BM3The BM3 is a block-building block that uses the ABC technique to decelerate and stop. With him a prototypical block-road operation is possible. The number of blocks is not limited as a BM3 is used for each block. The BM3 has a connection for light signals * for status display: signal red = follow-up block occupied, BM3 is switched to "stop", signal green = follow-up block free, BM3 is switched to "drive". The last block of a non-circular sequence of block sections require

The BM2 module is available for the demanding model railroader. Not only does it allow the train to stop at "Hp 0" before the signal, it also provides the installation of a slow-travel section for "Hp 2". The distance before the signal is divided into a driving and a braking section. The length of the riding section must be such that the longest train there completely fits into it. The length of the braking section depends (as with BM1) on the set braking deceleration or the set braking distance

PIKO digital decoder 8-pole NEM 652, multiprotocol with RailCom Plus®

Vehicle function decoder FH22A for SX1, SX2, DCC and MM.Vehicle function decoder 2.0 AOperating mode SX1, SX2, DCC, MM, DC-analog, AC-analogDimensions [mm] 16.1 * 15.8 * 3.3Total load capacity 2.0 AMax. Driving voltage 30 VSwitching voltage for AC analog max. 45 V peak = 30 V eff.LV, LR (dimmable) 150 mA eachAUX1, AUX2 (dimmable) 300 mA eachAUX3, AUX4 1.0 A eachAUX5, AUX6 unamplifiedwith SUSI interface (if AUX5 / AUX6 deactivated)Product features and functionsFor optional operation with conventi

Vehicle decoder DH10C 2nd generation for SX1, SX2, DCC and MM with ribbon cable for NEM 651.Operating mode SX1, SX2, DCC, MM, DC-analogDimensions [mm] 12.7 * 8.9 * 1.4Total load 1.5 AMax. Motor current 1.5 AMax. Driving voltage 30 VFunction outputs light: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 300 mA eachFunction outputs: AUX5, AUX6 unamplified *)With SUSI interface (if AUX5 / AUX6 deactivated)*) Unamplified function outputs A

PIKO SmartProgrammer

m 84 Decoder

m 83 Decoder

Doehler & Haass DH21B-5 vehicle decoder NEM 660/RCN-121 interfaceOperating mode SX1, SX2, DCC, MM, DC analog, AC analogDimensions [mm] (under reserve) 20.7 * 15.8 * 5.2Total load capacity 2.0 AMax motor current 2.0AMax. driving voltage 30 VSwitching voltage with AC-analogue max. 45 V peak = 30 V rms.LV, LR (dimmable) each 150 mAAUX1, AUX2 (dimmable) each 300 mAAUX3, AUX4 unamplifiedAUX5, AUX6, AUX7, AUX8 unamplifiedwith SUSI interfaceProduct features and functionsFor optional operation with a co

High-Efficiency Motor Upgrade Set

High-Efficiency Motor Upgrade Set

Square loudspeaker, 8 ohm. 15x11 mm.

GER: PIKO Rückmeldesensor (2 Stück)

6-pin decoder, straight pins (NEM 651)

GER: PIKO SmartControllerwlan

GER: PIKO SmartControlwlan Set