Components for use with the Lenz digital system.

GER: LED Beleuchtungsbausatz IC "modern" Abteilwagen

GER: LED Beleuchtungsbausatz IC "modern" Großraumwagen

Function decoder, 500 mA.

Update chip for the Central Control 2000 for installation.

Z21 WLANMAUS

Doehler & Haass PD05A-4 Nano locomotive decoder for 6-pole interfaces, NEM 651Nano locomotive decoder 0.5 AMode of operation SX1, SX2, DCC -not DC analog, not MMDimensions [mm]  5.0 * 7.9 * 2.5Total load capacity  0.5 AMax. Motor current  0.5 AMax. Driving voltage  18 V2 light outputs, dimmable  150 mA eachProduct features and functionsFor optional operation with digital systems according to SelecTRIX 1 and 2 or according to NMRA standard (DCC)In digital mode the last programmed system is used (

Decoder, with cable, 0.5A.

GER: PSD S ICE 3 8polig

LokPilot 5 Fx DCC Funktionsdecoder 21MTC NEM660The LokPilot 5 Fx DCC is a function decoder without a motor output and therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its properties and also the basic properties of all other LokPilot 5 decoders, but is a pure DCC decoder. The LokPilot 5 Fx DCC is supplied in three versions: In addition to the "classic" version with an 8-pin NEM 652 cable harness, a version for the 21MTC

ECoSlink bus cable, 7-pin mini-DIN plug to 6-pin mini-DIN plug, length 0.8m. The ESU Navigator has a USB interface for connecting to a PC. This interface is deactivated ex works. The Navigator base station software must be updated to use them. The ECoSlink bus cable 50305 provides the connection between ECoS and the navigator.

The SwitchPilot Extension Module only works in conjunction with a SwitchPilot. When plugged in at the side, it is supplied with power directly from the SwitchPilot. It contains a total of 4 dual relays (2 x UM), each of which is permanently assigned to a transistor output pair of the SwitchPilot. The position of the respective relay depends directly on the switching state of this output pair. With the help of the relay, loads can be switched galvanically isolated from the rest of the rail circui

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. Operating modes: The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters al

Miniature servo, supply voltage: 4.8V - 6.0V DC (nominal 5V), power: up to 1.0 kg / cm, length of connecting cable: approx. 120mm, accessories: servo mount, special servo horn for positioning wire, cross horn, mounting screws, positioning wire, drilling template, dimensions : 26mm x 13mm x 24mm.

LH101-R wireless hand controller with the LTM101 receiverBatteries and connection cable are included.Dimensions of the LH101-R wireless hand controller: 144 x 62 x 46 mmDimensions of the LTM101 receiver: 53 x 60 x 20 mmLH101-R wireless hand controller: like the LH101, but without the cable:The new LH101-R wireless hand controller from Digital plus is identical in functionality and operation to the LH101 hand controllerConnection for control via XpressNet with the LTM101 wireless receiver.Up to 4

GER: PIKO SmartDecoder XP 5.1 PluX22 mfx

Transformer 18V/5,3A

This adapter enables the connection of motorized point machines (two wires, change of direction of rotation by reversing the polarity) to our function decoder. A separate adapter is required for each motorized point machine. All properties of the function decoder (adjustable pulse time, short-circuit protection, etc.) are retained.

Function decoder, 500 mA.

Decoder with PluX16 direct plug, 1.5A.

The new eight-fold Doehler & Haass brake module enables asymmetrical digital voltages to be generated at low cost. For each track section you can set separately whether the asymmetry for braking or for slow travel should be generated. Since the asymmetry is only generated when the track signal is also evaluated by the decoder, there is no difference in brightness when lighting when entering or exiting the braking section. Dimensions [mm]: 102 x 63 x 24, operating mode SX1, SX2, DCC, total load c

With the help of the SUSI adapter, you can conveniently connect SUSI modules with a connection cable with a standard plug, such as the DH SUSI sound module SH10A-2 or the DH SUSI energy storage device SP05A-2 or SUSI modules from competitors, to the programmer ,

Cable set with 6-pin socket to NEM 651, DCC cable colors, 300mm length. If the locomotive to be converted does not have a digital interface, but you do not want to cut off the interface connector of the decoder, our cable sets 51950 or 51951 will help you: First install a suitable cable harness and then simply plug in the decoder. How to digitize the pros!

This round speaker module can replace a 28mm round speaker in most cases. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves high-quality bass reproduction and a considerable sound pressure even in the highs and mids. The module is particularly suitable for diesel or steam locomotives, where contemporary bass reproduction is important. The speaker fits perfectly with our LokSound 5 micro, LokSound 5 or LokSound 5 L decod