Miniature Sound Decoder, NEM 651 6-pin interface angled, 19 x 8.6 x 2.9 mm, audio 1 W, 0.7 A, 4 FU. Direct connection Energy storage 15 V (up to 1000 ?F, or up to 3000 ?F, if no service mode and SW update / sound loading), 4 connecting wires (because there are no pins for 6-pin. Interface No Pins: Gem.Plus, Mass, 2 x speakers), 4 solder pads (2 fu, 2 susi, logic.).

Miniature Sound Decoder, 19 x 8.6 x 2.9 mm, Audio 1 W, 0.7 A.

Sound Decoder NEM 658 16-pole PLUX16, 19 x 11 x 3.1 mm, with 6 foot outputs, 13 connecting wires (2 x rail, 2 x motor, 2 x acc. Plus, mass, 4 foot outputs, 2 x Speaker), 2 solder pads (other FU outputs).

MN140E24 digital decoder 0.7A Interface E24.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same driving behavior, the same mapping, the same script capabilities and a similar projec

V-based, or the self-building of mini-gold modules, or with Stayalive controllers, e.g. Staco1.Content: Mini-Gold Cap 0.3 F / 2.7 V, 4 x 12 mm (diameter x length).

Miniature Gold Caps (0.3 f) for Decoder MS580N18 as an extension of the internal energy storage to 150,000 ?F on 5 finished module made of 6 in series-connected mini gold caps in block form (2 threesome rows one above the other) for MS Decoders of the Category 2 (ie with direct energy storage connection), 15 V variant, eg MS450, MS440.Not allowed for MX Decoder because charging transistor is not sufficiently powerful.Content: 5 x Mgoblock Mini-Gold Cap Module 50,000 ?F / 16 V, 14.6 x 7.8 x 14 mm

Broadband loudspeaker, 90 x 50 x 35 mm, 130-20 kHz, 8 ohms, 10 W (nominal load capacity).

Broadband speaker, 90 x 40 x 14 mm, 120-20 kHz, 8 ohms, 4 W (nominal load capacity), wood membrane.

Broadband speaker 6 cm, low installation depth (2 cm), waterproof, 170 Hz - 15 kHz, 8 ohm / 3 W.

Broadband speaker 5 cm, low installation depth (2 cm), waterproof, 170 Hz - 17 kHz 8 ohm / 3 W.

Broadband speaker 5 cm, 150 Hz - 10 kHz, 8 ohm / 4 W, low installation depth (21 mm), without tabs.

Broadband speaker 5 cm, 200 Hz - 20 kHz, 8 ohm / 4 W (nominal load bark.), Low installation depth (23 mm).

Broadband speaker 8 cm, 100 Hz - 20 kHz, 4 ohm / 30 W (nominal load capacity).

Broadband speaker 7 cm, 200 Hz - 20 kHz, 8 ohm / 8 W (nominal load capacity).

Broadband speaker 5 cm, 150 Hz - 20 kHz, 8 ohms / 5 W (nominal load capacity), installation depth 31.5 mm.

Miniature Rectangle Speaker with integrated resonant body, 8 x 12 x 8 mm, 8 ohm / 0.5 W.

Rectangular speaker 25 x 15 mm, without resonant body, 8 ohm / 1 W.

Dumbo with integrated resonance body, 18 x 13 x 8 mm, 8 ohm / 1 W.

Light board LIPLDHW1 yellow LED interior lighting with decoder and second address as an aid to train formation. This is typically set to the address of the locomotive in the light boards and function decoders of a train. This creates the possibility of switching the interior lighting of all these cars, as well as the exterior lights of the rear or control car, using the function keys of a single address (usually the locomotive address). In order to be able to use this comfortably, light circuit

Connection board at the I2C bus for 16 signal lights, with solder pads.

Gold Caps (1 F) for self-assembly of gold cap modules, consisting of 6 or 7 in series-connected gold caps as energy storage (stronger than with mini-gold caps) for MS Decoder of Category 2.20 x Goldcap 1 F / 2.7 V, 8 x 12 mm (diameter x length).

Digitally switchable coupling for single tractions. Matching counterparts: Roco universal coupling or MK. The non-height-adjustable couplings are suitable for all cars with a standard shaft according to NEM 362. The height-adjustable clutches only need if the car has no standard shaft but a NEM 363 coupling recording.Technical data: voltage: 12-22V DC, maximum current: 90mA, maximum load duration: 10 seconds, bobbin: brass, mechanics: permanent magnet, clutch recording: NEM 362 / NEM 363, buffer

Crimp tool for the ZIMO Crimp socket strips.

25 Crimp socket strips Criovs14 + Crimp tool