20-pin band cable roll 30m

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

StayAlive controller with Next18 interface. The STACO2 is designed to equip a model with a Next-18 interface and an energy storage device. A Next-18 decoder can then be plugged onto the STACO2 like an adapter board, which then outputs the decoder connections via 13 soldered wires.Scope of delivery: 1 x STACO2, 14 x 10.4 x 1.9 mm, for controlled charging and discharging of 2 mini gold caps, 13 soldered wires, 2x mini gold caps 1 F/2,7 V, 6,4 x 9,8 (diameter x length), min. 12.5 V - max. 18 V.

StayAlive controller with Next18 interface. The STACO2 is designed to equip a model with a Next-18 interface and an energy storage device. A Next-18 decoder can then be plugged onto the STACO2 like an adapter board, which then outputs the decoder connections via 13 soldered wires.Scope of delivery: 1 x STACO2, 14 x 10.4 x 1.9 mm, for controlled charging and discharging of 2 mini gold caps, 13 soldered wires, 2x mini gold caps 0.3 F/2.7 V, 4 x 12 mm (diameter x length), min. 12.5 V - max. 18 V.

Replacement fitting motor for TR92-101

Tantals for "category 2" decoders (with direct energy storage connection), 15 V variant. Usually a larger number of tantals are connected in parallel: at least 5 are recommended, with MX decoders up to 25, with MS decoders unlimited number.

Replacement plug set for stone module (20pol ribbon cable 2m, 2x crimp plug, 1x 2pol St., 4x 3pol St., 1x size 3pol St., 1x 4pol St.)

Base Equipment MX10EC + Race MX33 + USB Stick + CAN cable + 8pola1m + power supply NG300 + operating instructions (MX10, MX33)

1 x StayAlive controller STACO3B (10x7.3x2mm) for decoders without or with limited provisions for direct energy storage connection. 2 miniature gold caps (solder bridge) can be connected via the two free wires via STACO3B. Suitable for N & TT frame models only.Scope of delivery: 1 x STACO3B, 2 soldered strands, 2x mini gold cap 1 F/2.7 V, 6.4 x 9.8 mm.

1 x Stayalive Controller (10x7,3x2mm) for Decoders without or with an integral precautions for direct energy storage connection. About Staco1 2 or 3 miniature gold caps (solder bridge) CAN be connected via the two free wires. + Scope of delivery: 1x Staco1 and 3x mini-gold caps, 0.3f / 2.7v, 4x12mm

Assortment of components, for the construction of low-cost energy storage circuits for about 20 Decoders without precabilities for direct connection. Content: see www.zimo.at, Decoder, energy storage

Servo Decoder, 105 x 50 x 15 mm, 3.0 A. 8 complete servo connections, ie 3-pole (5V or 6V supply, mass, control line). Supply directly from the rail (energy and DCC data) and / or from an auxiliary supply (so that switch switches is possible even after a short circuit); Railcom for position feedback and CV reading.

Accessories Decoder, 19 x 11x 3 mm, without normal switch outputs, 16 outputs for lights (LEDs), e.g. eight 2-term signals or four with 4 lights.

Double-turn Decoder, 19 x 11 x 3.5 mm, 0.8 A (tip 2.5 A), for 2 double coils, motor or EPL drives, 4 inputs for position feedback or forced circuit, 16 outputs ( Open Collector 100 mA) on solder pads for lamps (LEDs), eg eight 2-term signals or four with 4 lights, 8 connecting wires.The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in

Severweight Decoder, 19 x 11 x 2 mm, 0.8 A (tip 2.5), additionally 8 outputs (open-collector 100 mA) on solder pads for lights (LEDs), eg four 2-term signals or two With 4 lights, 5-port wires.The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in drive housing, for example from LGB turns. All drive types for soft and shape signals are

Plug set for MX697S or replacement plug set for MX697V

Function Decoder, 26 x 15 x 3.5 mm, 1.8 A, 8 function outputs, energy storage terminal, variable low voltage output, with 21MTC interface NEM660.

Sound Decoder MX660, 42 x 9 x 2.4 mm, 0.8 A, audio 1 W, 6 function outputs, particularly flat design without connection wires for self-wiring.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to ac

Sound Decoder MX659N18 with NEXT18 interface NEM662, 20 x 9.5 x 4 mm, 0.7 A, audio 1 W, 4 function outputs.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered driv

Sound Decoder MX658N18 with NEXT18 interface NEM662, 25 x 10.5 x 4 mm, 0.8 A, audio 1 W, 4 function outputs.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered dri

Decoder MX636CV with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1.8 A, 6 function outputs, energy storage connection also for 16V ELKOS and gold caps, semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A ), Low voltage source for function outputs (1.5V).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) dri

Decoder MX635V with 8-pin interface NEM652 on wires, 26 x 15 x 3.5 mm, 1.8 A, 10 function outputs, connection for energy storage 16V (arbitrary capacity, also gold cap), semi-synchronous rectifier for higher motor current and total load capacity ( to 1.8 A), low voltage source for function outputs (1.5V).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 1

Decoder MX633R with 8-pin interface NEM652 on wires, 22 x 15 x 3.5 mm, 1.2 A, 10 function outputs, with SUSI, with larger EEPROM memory for up to 1024 CV's, connection for energy storage 16V (arbitrary capacity, too Goldcap).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in

Test and connection board for MS Decoder MS950 MS955 MS990