The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

SwitchPilot 3 decoders are optimized for stationary use on your layout and can switch conventional double-coil turnout drives, light signals, magnetic decouplers, light bulbs or other stationary consumers. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 is multi-protocol capable and can be used with central

The PowerPack supercapacitor can be connected to the 50700, 50702, 50708, and 50709 indoor lighting to reliably prevent low power flicker. Capacity 0.22F / 5.5V.

Model: small, easy-to-install module for the driver's cab. Consisting of a single warm white LED and control electronics.

Round loudspeaker 23mm x 6mm, with intermediate resonant body 8 ohm / 1 W.

8-pin (2 x 4) pin header in the grid 2.54 mm (corresponds to NEM652 plug) to make a R-type t-type normal wired Decoder; e.g. from MX630 MX630R.

Functional sound decoder with Next18 interface for control cars and motorless power cars.13.6 x 9.3 x 3.1 mm0.7 A total current, duration6 amplified function outputsSUSI pins (SUSI, servo or logic level inputs/outputs)Speaker output 1 watt / 8 ohmsSpeaker connection available on interface and solder pads

Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix®, 32 functions switchable (depending on the control panel), 32-bit processor, digital Class "D" amplifier with up to 3 W power (LokSound 5 XL: 13 W), each channel in 16-bit resolution and 31250 kHz sample rate, noise memory with 128 Mbit capacity, motor control with 50 kHz clock speed, RC servos and Susi modules controllable, 3 new, individually adjustable brake controller, two-stage heavy load simulation, Upgradeable with ESU-Lo

The LokSound 5 Nano DCC with a 6-pin interface measures 13mm x 18mm x 4mm. This means it should be compatible with virtually all N and TT scale model trains. The LokSound 5 Nano DCC decoder is a dedicated DCC decoder and comes with an 11 x 15 mm "sugar cube" speaker and a sound capsule kit.Operating modesThe LokSound 5 Nano is a "purebred" DCC decoder. 14 to 128 speed steps are standard, as are 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail-ComPlus®, the decoders r

The compact SwitchPilot 3 Servo Mini decoder is designed for stationary use in hard-to-reach areas of your layout and can control an RC servo drive. The SwitchPilot 3 Servo Mini features an innovative operating concept consisting of a 4-line, backlit OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo Mini is multi-protocol compatible and can be used with both Märklin® Motorola® control units (e.g., 6021, Central Station®, or Mobile Station®) and DCC-compatible control un

The compact SwitchPilot 3 Mini Decoder is designed for stationary use in hard-to-reach places on your layout and can switch a double-coil turnout drive or two magnetic uncouplers or a two-aspect light signal or two light bulbs or other stationary loads.The SwitchPilot 3 Mini features an innovative operating concept, consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Mini is multi-protocol compatible and can be used with both Märklin® Motorol

Sound Decoder with 21MTC interface, 30 x 15 x 4 mm, audio 3 W (4 ohms), 1.2 A, 6 FU, FA3, FA4, FA5, FA6 preconfigured as reinforced outputs, Connection for energy storage 15 V (arbitrary capacity) .

MN170F digital decoder 0.7A 6-pin interface NEM651 on wires. Variant of the MN170, 6-pin interface NEM651 on wires, 1 free wire.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same d

Decoder software updates and loading of sound projects directly from the computer. The Zimo KLUG is the new compact loading and update device for Zimo decoders. It is versatile, handy, and affordable – yet it forgoes a display and requires only a connection to a computer (Windows) and decoder loading and update software. A decoder can either be plugged directly into the Zimo KLUG or – remaining in the vehicle without opening it – connected via the track. The MSTAPK and MSTAPG boards can also be

DC power supply 18V, 2.22A, 40 watts, for Mxulfa

Function Decoder, 25 x 15 x 4 mm, 1.8 A, 10 function outputs, energy storage terminal, variable low voltage output, 10 stranded wires.

Sound Decoder with NEM 658 16-pin PLUX16 interface, 30 x 15 x 4 mm, 13 connecting wires (2 x rail, 2 x motor, acc. Plus, mass, Elko Plus, 4 foot outputs, 2 x speakers), 6 solder Pads (other FU outputs), direct connection energy storage 15 V (unlimited capacity) on Plux pin header.

GER: RD 4000+ für el. Verbraucher

With the CabControl, we combine the ease of use of our popular MobileControl Pro handheld controller with the Integrated Control Unit (ICU) base station, which includes a powerful booster, a high-quality DCC control center with Railcom® and RailComPlus®, and a complete Wi-Fi access point.With its 7A output power, the CabControl is an ideal control center for model railroaders of all gauges who seek simple manual operation via radio, but don't want to forgo the convenience of automatic locomotive

This adapter board provides a comfortable connection of your LokSound 5 L or LokPilot 5 L decoder. The decoder is plugged directly into the socket connectors. On the output side, the most important connections can be contacted directly at robust screw terminals - without soldering! A socket for the optional connection of a SUSI module as well as pin headers for the direct connection of four RC servos complete the equipment. This adapter board enables a professional, clean wiring of your locomoti

50 pieces 6-pin modular plug (Western Strecker) for mounting.The ZIMO Bus System, based on the industrial-proven CAN protocol, is the most powerful and reliable under Digital system bus systems with at least 1000 messages / sec. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s. The protocol originated from automotive

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi