ROCO LINE turntable with electric below-baseboard propulsion mechanism and control unit

2-pole connecting cable

Plastic insulating rail joiners

Model: Gauge HO. Simple crossing switch EKW10 without drive. Type with internal tongues. Length 345 mm (= G1 + G½), crossing angle 10 °, branch radius 959 mm. Two 2.5 mm diagonal spacers (D2) are included in the left or right crossing installation. An 8 mm spacer (D8) is included for the combination with diagonally built-in 10 ° switches. 2 drives are needed. The Roco-Line track is a threshold track made of nickel silver with a profile height of 2.1 mm. With eight parallel loops, eleven differen

Double slip turnout DKW10

Model: Gauge HO. Simple crossing switch EKW15 without drive. "English" design with internal tongues. Length 230 mm (standard length), crossing angle 15 °, branch radius 531 mm. For diagonal installation, two D4 and one D12 spacers are included. You need 2 drives. The Roco-Line track is a threshold track made of nickel silver with a profile height of 2.1 mm. With eight parallel loops, eleven different turnouts and flexible tracks, it offers many possibilities for realizing a prototypical layout.

Curved track R9, 15°

Curved track R10, 15°

Curved track R6, 30°

Curved track R3, 30°

Curved track R2, 30°

Electric uncoupler track (G½)

Straight track G½

Straight track G¼

Straight track DG1

Curved track R2¼, 7.5°

Below baseboard turn-out mechanism

Track fixing pins, short

Decoder MX616N 6-pin pin strip, 8 x 8 x 2.2 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI PINS.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovere

The ECoS 2.5 Command Station has been technically revised internally to take into account the availability of electronic components. The ECoS offers you the most modern digital technology and a range of functions that is unique in the model railway industry, with which both (new) beginners and experts who are looking for a new headquarters will not be disappointed. Operating the device is child's play thanks to the large color display with a new capacitive touch panel and the coordinated user in

With the ESU L.Net converter we offer the possibility to connect handheld controllers of the companies Uhlenbrock® or Digitrax® directly to the ECoS or Central Station 60212 "Reloaded". In addition, switching modules or feedback modules in an ESU system can also be meaningfully integrated and reused. Since the aforementioned modules use the well-known Loconet® protocol for communication, the L.Net converter implements a so-called Loconet ™ "Master" and translates the commands received there and

Operating modes: DCC, Motorola® with up to 127 addresses, K83 compatible, supply by the digital central unit or separate DC or AC voltage transformer up to 18V AC. Outputs: 16 outputs, each with 250mA loadable, connection with removable terminal blocks, version as push / pull stage: The outputs can be switched individually against decoder ground or positive voltage, individual assignment of the decoder addresses to the outputs (mapping), lighting effects, brightness individually adjustable , Cro

SwitchPilot adapter for common cathode signals. Set of 2 pieces for a total of 8 outputs. The SwitchPilot decoder can also be used to easily operate light signals in addition to turnout drives. In most of these cases modern light-emitting diodes are installed in these. In order to reduce the number of cables, the anode connections are usually coupled on the signal side in the case of multipoint signals. However, some signal manufacturers (for example Viessmann®) couple the cathode so that these

Manual for the digital model railway beginners, Part 1.1 - German