Decoder with cable, 1.5A.

Vehicle decoder 1.5 A (2nd generation) for the 6-pole interface. Strongly reduced dimensions, higher total load capacity and higher motor current (1.5 A), AUX3 and AUX4 as amplified function outputs (1.0 A), AUX5 and AUX6 as unamplified function outputs (alternative to SUSI interface), about five times buffer capacity (therefore longer contact interferences can be passed without data loss). Operating mode SX1, SX2, DCC, MM, DC-analog, total load 1.5 A, maximum motor current 1.5, maximum driving

Cable for connecting SX components, length 2.0 m.

USB cable A / B, length 180 cm.

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

Operating modes: Direct bus connection to ECoSlink. Operation with ECoS or Central Station "Reloaded" possible. Feedback: 4 feedback sensors permanently configured as track occupation indicator (current sensor). Galvanic Trennug the feedback from the central office. RailCom®: 4 sensors configured as RailCom feedback ("local detector"). Detection of the locomotive address. Dimensions: 86mm x 86mm x 25mm. Scope of delivery: ECoSDetector RC feedback module, connection terminals, ECoSlink bus connec

Universal usage. Multifunctional light decoder with numerous options yet easy handling. The functions can be configured with DIP-switches. More advanced options can be activated digitally via CV-programming. 4 groups, each with 8 current protected outputs can be switched individually, or configured as various lighting scenarios. Flicker-free LED lighting and various effects provide numerous possibilities on your layout. For each of the 4 groups, you can select from more than 20 different effects

Universal usage. Fits to e.g. soldiers item 1530, 1531 and 1532.

Universal usage. Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode.Dimensions: L 1,6 mm x W 0,8 mm.

The newly developed Doehler & Haass sensor replaces the previous Doehler & Haass occupancy detector. It takes over the most important features of its predecessor: 8 track sections, occupancy information in conjunction with all digital systems, adjustable release delay, updating capability. Unlike its predecessor, which only enabled the SX1 locomotive number feedback along with the FCC Digital Center and the Doehler & Haass Power Packs, the new transmitter now supports SX1 locomotive number feedb

Universal usage. Outer diameter: 0,6 mm.

The ideal device for stable and powerful switching current as well as bright and flicker-free LED lighting. For maximum switching capacity of digital decoders with separate power supply. For connection to decoders Art. 5211, 5231 and 5280. Also suitable for decoders from other manufacturers, provided they have a separate power supply. LED lights work flicker-free and are almost twice as bright as when powered by an AC transformer. A power module is enough to supply several decoders or up to 100

Universal usage. Outer diameter: 0,6 mm.

Universal usage. Compatible with the s88. The feedback decoder can be used with the Märklin Interface, the Märklin Memory, Uhlenbrock Intellibox and Viessmann Commander. The 16 inputs of the module for track occupancy detection or for starting memory-switch sequences the track contacts item 6840 or with Märklin K-and C-tracks directly to the contacts track section. Attached is a 15 cm length special cable and original s88 plugs. For 2 rail tracks even the track occupancy detector item 5233 is ec

Universal usage. Practical cable ties help you keep track - even for complexer layouts. Suitable cable retaining clamp: item 6846.

Universal usage. To insulate joints and to mark cables. Contracts strongly under influence of heat, hot air. Length 40cm, diameter 1,2mm.

Universal usage. To insulate joints and to mark cables. Contracts strongly under influence of heat, hot air. Length 40cm, diameter 1,2mm.

Universal usage. To insulate joints and to mark cables. Contracts strongly under influence of heat, hot air. Length 40cm, diameter 1,2mm.

Model: HO scale. H / V signal system Block signal with 2 lights (green / red) of the DB. Fine scale product with LED. Structure and railing made of brass, fine details made of 3D-printed material. Resistors up to 16 V (direct current) are included.

Model: HO gauge. Dutch NS dwarf signal with 3 LEDs (green+red+yellow). Analogue / DCC compatible. Includes resistors for connection to max. 16 V.

Model: HO Gauge. 13-pin cylinder connector base.The cylindrical connector feet were specifically developed for connecting light signals from the former manufacturer Alphamodell (Németh Andor, Hungary) and are based on its proven connector system. They are available in 6-pin and 13-pin versions, optionally with soldered connecting cables or without cables for individual wiring. The versions with connecting cables offer a significant practical advantage: the sensitive pins of the cylindrical conne

Model: HO Gauge. 6-pin cylinder connector base.The cylindrical connector feet were specifically developed for connecting light signals from the former manufacturer Alphamodell (Németh Andor, Hungary) and are based on its proven connector system. They are available in 6-pin and 13-pin versions, optionally with soldered connecting cables or without cables for individual wiring. The versions with connecting cables offer a significant practical advantage: the sensitive pins of the cylindrical connec

Model: HO Gauge. 13-pin cylinder connector base with connecting cables.The cylindrical connector feet were specifically developed for connecting light signals from the former manufacturer Alphamodell (Németh Andor, Hungary) and are based on its proven connector system. They are available in 6-pin and 13-pin versions, optionally with soldered connecting cables or without cables for individual wiring. The versions with connecting cables offer a significant practical advantage: the sensitive pins o

Model: HO Gauge. 6-pin cylinder connector base with connecting cables.The cylindrical connector feet were specifically developed for connecting light signals from the former manufacturer Alphamodell (Németh Andor, Hungary) and are based on its proven connector system. They are available in 6-pin and 13-pin versions, optionally with soldered connecting cables or without cables for individual wiring. The versions with connecting cables offer a significant practical advantage: the sensitive pins of