Adapter board for US models (Athearn, Kato, U.V.A ..), for PLUX16 and PLUX22 Decoders. The Decoder is plugged into the socket bar of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable.These versions of the adapter board contains voltage regulators for a functional low voltage of 1.5 V.The Adapus adapter board CAN be used with Decoders equipped with 16 V energy storage connection. Not allowed is the use of adapus together with MX630P16 and MX648P16!

This design of the adapter board contains voltage regulators for a functional low voltage of 5 V. With the aid of the 5 V voltage, for example, servos CAN be operated.Adapter board for PLUX22 Decoder, the Decoder is plugged into the socket strip of the adapter. About large solder pads, the wiring within the locomotive CAN be made comfortably, whereby the connections (plus lines) common for a variety of devices (plus lines) are multiply. The AdapLu adapter board is equipped with a rectifier that

This design of the adapter board contains voltage regulators for a functional stress of 1.5 V.Adapter board for PLUX22 Decoder, the Decoder is plugged into the socket strip of the adapter. About large solder pads, the wiring within the locomotive CAN be made comfortably, whereby the connections (plus lines) common for a variety of devices (plus lines) are multiply. The AdapLu adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and o

This design of the adapter board contains voltage regulators for a functional stress of 5 V.Adapter board for 21MTC Decoder, the Decoder is plugged into the pin header of the adapter, as AdamtC only with screw terminals. Size: 44 x 26.5 x 6 mm. The adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it.The adapter board CAN be used along with all 21MTC Decoders which are a C-type - therefore MX631C, MX

This design of the adapter board contains voltage regulators for a functional stress of 1.5 V.Adapter board for 21MTC Decoder, the Decoder is plugged into the pin header of the adapter, as AdamtC only with screw terminals. Size: 44 x 26.5 x 6 mm. The adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it.The adapter board CAN be used along with all 21MTC Decoders which are a C-type - therefore MX631C,

Adapter board for 21MTC Decoder, the Decoder is plugged into the pin header of the adapter, as AdamtC only with screw terminals. Size: 44 x 26.5 x 6 mm. The adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it.The adapter board CAN be used along with all 21MTC Decoders which are a C-type - therefore MX631C, MX634C, MX638C, MX636C, MX644C, ... and Success Types -Not allowed is the use of MX631D, MX634

CAN2 special adapter cable Driving cables 2 m length.

CAN2 special adapter cable Driving cord 1 m length.

Installation pliers for stripping the cable and pressing the cable into the plug.

Finished CAN bus cable with plugs mounted on both sides (also called driving cord) in 3 m in length.The Zimo Bus System, based on the industrial-proven CAN protocol, with at least 1000 messages / sec is the most powerful and reliable under Digital system bus systems. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s. T

Finished CAN bus cable with plugs attached on both sides (also called driving cables) in 100 cm in length.The Zimo Bus System, based on the industrial-proven CAN protocol, with at least 1000 messages / sec is the most powerful and reliable under Digital system bus systems. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit

100 m - collar 6-pin cable (colored wires 0.14 mm, black outer shell, a flat shape).The ZIMO Bus System, based on the industrial-proven CAN protocol, is the most powerful and reliable under Digital system bus systems with at least 1000 messages / sec. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s. The protocol orig

Finished CAN bus cable with plugs attached on both sides (also called driving cord) in 10 m in length.The Zimo Bus System, based on the industrial-proven CAN protocol, with at least 1000 messages / sec is the most powerful and reliable under Digital system bus systems. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s.

GER: PIKO SmartDecoder XP S Midi PluX22 inkl. Lautsprecher

GER: PIKO SmartDecoder XP S Rh 1000 PluX22 inkl. Lautsprecher

Sound decoder Blank PluX16

GER: LED-Beleuchtungsbausatz Rücklicht für WRm 61

Simply connect the wires from the scraper and brush directly to your layout power supply and apply them to the driving wheels, one on each side.

Keep your wiring organised and tidy with these self adhesive clips. Pack of 20 clips.

LH101-R wireless hand controller: like LH101, but without cable:The new LH101-R wireless hand controller from Digital plus is identical in functionality and operation to the LH101 hand controllerConnection for control via XpressNet with the LTM101 radio receiver.Up to 4 LH101-R wireless hand controllers can be operated on one LTM101 radio receiver.The radio technology is developed in collaboration with the company Massoth.The power supply is via 2 AA batteriesIf the batteries are empty: no probl

Compatible with the Hornby HM7000 digital system. Transformer and connection cable for the Hornby track system, for power supply with 15V AC 4A. Version with mains plug for UK sockets.

Connection cable for connecting Hornby transformers to Hornby sidings.

Simple point motor decoder for Standard solenoid point motors, 2 wire main track or bus connection minimize wiring. The super easy learning decoder requires no special programing when addressing. This decoder features an easy to use screw terminal block to insert your wires into. There is also a 3 pin harnes to attaches to the Surface Mounted Point Motor but with simple modification it can be fitted to other Solenoid Point Motors. The small switch on the side of the board is for setting the addr

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm