Round speaker 28 mm, preferably to use in locomas provided for the installation of such a loudspeaker, so integrate the resonance body in the locomotive housing, 8 ohm / 1 W.

Miniature Rectangle Speaker with integrated resonance body, 11 x 15 x 7 mm, 8 ohm / 1 W.

Adapter board for connecting PluX22 decoders to special 21MTC boards that require 5 V levels at the logic level outputs.Only required for special 21MTC locomotive boards - e.g., Sudexpress Eurodual, Stadler BR 159, LS Models BR 120, or LS Models BR 184 (reissues from 2023) - to use a PluX22 decoder (only MX633P22, MX635P22, MN330P22, MS450P22 - NOT MX645P22)New Revision C from July 2023: RevC suitable for Sudexpress Eurodual, Stadler BR 159, LS Models BR 120, and LS Models BR 184.16.8 mm x 19.5

GER: SD 2000 für Magnetartikel

Switching power supply for connecting or supplying the Central Station and the Booster. Input 120 V/60 Hz / output 19 V/100 W DC. Connection: 4-pole mini DIN high current plug .The cable cross-section from the Central Station to the track must be at least 0.5 mm²! Recommended exclusively for track 1.

Switching power supply (Japan) for connecting or supplying the Central Station 60216, 60226 and 60214/60215 and the Booster 60175 and 60174. 100 to 240 V/50 Hz input / 19 or 22 V/100 W DC output switchable. Connection: 4-pin mini DIN high-current plug. The cable cross-section from the Central Station to the track must be at least 0.5 mm²! Recommended exclusively for track 1.

Switch-mode power supply unit (Australia) for connecting or supplying the Central Station 60216, 60226 and 60214/60215 and the Booster 60175 and 60174. 100 to 240 V/50 Hz input / 19 or 22 V/100 W DC output switchable. Connection: 4-pin mini DIN high-current plug. The cable cross-section from the Central Station to the track must be at least 0.5 mm²! Recommended exclusively for track 1.

UK switched-mode power supply unit for connecting or supplying the Central Station 60216, 60226 and 60214/60215 and the Booster 60175 and 60174. 100 to 240 V/50 Hz input / 19 or 22 V/100 W DC output switchable. Connection: 4-pin mini DIN high-current plug. The cable cross-section from the Central Station to the track must be at least 0.5 mm²! Recommended exclusively for track 1.

Power supply 320W (30V; 10.7A) Meanwell HLG-320H-30A; 23x9x4,5cm; 1.8kg;

Locomotive board for the Zimo-MS950 decoder.8- and 9-pin socket strips34 solder pads, arranged on three sides, for locomotive wiring4 three-pin pin strips for direct connection of servos (servo 1 and -2 are always available, servo 3 and -4 when the SUSI pins are switched to servo operation.Dimensions: 61 x 24.5 x 20 mm (height with MS950 decoder)Delivery without MS950.

Sound Decoder NEM 658 16-pole PLUX16, 19 x 11 x 3.1 mm, with 6 foot outputs, 13 connecting wires (2 x rail, 2 x motor, 2 x acc. Plus, mass, 4 foot outputs, 2 x Speaker), 2 solder pads (other FU outputs).

Decoder MX623F with 6-pin connector NEM651 interface, 20 x 8.5 x 3.5 mm, 0.8 A, 4 function outputs, with SUSI.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered d

Decoder MX622 with strands, 14 x 8 x 2.5 mm, 0.8 A, 4 function outputs, no Susi pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered driving (without Decoder r

MN330 digital decoder 1.2A NEM-652 11 stranded wires. Wired variant of the MN330 with 11 connecting wires (2x rail, 2x motor, common plus, ground, elko plus, 4x FA) 9 soldering pads (6x FA, 2x SUSI, 1x switching input or logic level output).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the softwar

MN300 digital decoder 1.0A 11 stranded wires. Wired variant of the MN300, 11 connecting wires (2x rail, 2x motor, common plus, ground, elko plus, 4x FA) 4 soldering pads (2x FA, 2x SUSI).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large exten

Base device MX10 + Fahrer MX33 + USB stick + CAN cable + 8pola1m + power supply NG600 + operating instructions (MX10, MX33)

22-pin pin header, counterpart to 21MTC interface

Function Decoder, 14 x 9.5 x 2.1 mm, 0.7 A, 4 function outputs, with NEXT18 interface NEM662.

The new smoke generator "Dual" is suitable for vehicles of the nominal sizes Gauge G, Gauge 1 but also for larger vehicles in Gauge 0. In contrast to the two other smoke generators from ESU, both exhaust steam and cylinder vapor are integrated in one housing. Thus, you can finally retrofit your older locomotives with a realistic cylinder steam. The smoke generator "Dual" has a common tank that can be filled from above. Two separate fan motors with separate heating and temperature elements ensure

Adapter board, 18-pin Next-18 female to NEM651 6-pin, Flex, 88mm, with heat shrink tubing.

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

GER: PIKO SmartBooster 3A

PIKO SmartDecoder 4.1 PluX12

Functional sound decoder with 21MTC interface for control cars and motorless power cars.21.5 x 15 x 3.6 mm1.2 A total current, duration8 amplified function outputs (FA3 to FA6 switchable to logic level)SUSI pins (SUSI, servo or logic level inputs/outputs)1 switching inputSpeaker output 3 watts / 4-8 ohmsEnergy storage devices (16V electrolytic capacitors or 16V tantalum capacitors) can be connected directly.