The InductiveCharger enables wireless recharging of vehicles as well as inductive communication with the vehicle. It is comparable to the IR Traffic smart Art. 8405, but without its infrared reading function. Vehicles stop on the module and position themselves automatically over the charging coil, whereby charging currents are automatically adjusted.These modules are particularly suitable for locations with longer stopping times such as traffic lights, railway crossings or petrol stations. Sever

The module allows a variety of commands to be transmitted to the CarMotion vehicles via infrared signal. From simply flashing to braking and stopping CarMotion vehicles, e.g. B. in front of traffic lights. The two infrared transmitting diodes can be placed inconspicuously next to the road, but also lying in a small section in the road or in the shoulder. Like the vehicles, the module can be conveniently configured in the CarManager. All macros that are stored in the vehicles can be called up by

4-pin connection cables between Decoder and SUSI module (also for Mxulfa)

1 x StayAlive controller STACO3A (10x7.3x2mm) for decoders without or with limited provisions for direct energy storage connection. 2 miniature gold caps (solder bridge) can be connected via the two free wires via STACO3A. Suitable for N & TT frame models only.Scope of delivery: 1x STACO3A and 2x mini gold caps, 0.3F/2.7V, 4x12mm.

Zimo USB stick, as well as the delivery of the MXulf, as a substitute stick

Double-turn Decoder, 19 x 11 x 3.5 mm, 0.8 A (tip 2.5 A), for 2 double coils, motor or EPL drives, 4 inputs for position feedback or foreclosure, 8 connection wires.The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in drive housing, for example from LGB turns. All drive types for soft and shape signals are supported by double coils, m

Function Decoder, 20 x 11 x 3.5 mm, 1.0 A, 8 function outputs, with 8-pin interface NEM652 on wires.

GER: LED-Beleuchtungsbausatz Innenbeleuchtung für WRm 61

The Zimo Digital Centers: No big boxes, but state-of-the-art technology:At first glance, the very small dimensions (depending on the type 18 and 15 cm wide, 3 cm high) fall on, as well as the absence of heat sink and fans. Thanks to state-of-the-art Leistungslelektronik - five high-frequency switching regulators for rail outputs and auxiliary voltages - the device running despite 20 A (MX10EC: 12 A) on the rail and 5 A on the bus not hotbut the ZIMO system takes the same consideration for applic

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

Decoder ELNA Next18.

Decoder Next18 according to NEM662.

Decoder Next18 nach NEM662

Cable set with 8-pin socket to NEM 652, DCC cable colors, 300mm length. If the locomotive to be converted does not have a digital interface, but you do not want to cut off the interface connector of the decoder, our cable sets 51950 or 51951 will help you: First install a suitable cable harness and then simply plug in the decoder. How to digitize the pros!

The steam smoke distillate produces a realistic dense, white vapor and evaporates residue-free, without the usual traces in the smoke generator, on locomotives, building roofs or plant surfaces. It is also easy to wipe off with alcohol and will not affect the finish or aging of your models.

LokSound 5 Nano empty decoderWith the LokSound 5 Nano DCC, ESU has succeeded in developing yet another significantly smaller LokSound decoder: At only 19.6 mm x 8.5 mm x 3.2 mm, it is the smallest LokSound decoder we have ever built. Thus, it should really find its use in all vehicles of the nominal sizes N and TT. The LokSound 5 Nano DCC decoder is a pure DCC decoder with open wire ends for free wiring and comes with an 11 x 15 mm "sugar cube" speaker along with a sound capsule kit.The LokPilot

The professional test bench is simply connected to your digital central unit or the LokProgrammer. In addition to a 6-pin NEM 651 interface and an 8-pin NEM 652 interface, there is also a 21MTC NEM660 interface, a PluX22 socket and the Next18 interface. Locomotives without interface connectors can be contacted with single cable clamps. A high-quality bell armature motor with flywheel used in conjunction with direction LEDs to control the engine output. An LED monitor informs you about the functi

This adapter board provides the appropriate connection of the LokSound L decoder. The decoder is plugged directly into the female connectors. On the output side, the adapter board provides soldering points for all functions of the decoder. The adapter board can be fixed with screws in the model.

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

Servo Decoder, 105 x 50 x 15 mm, 3.0 A. for 8 servos (8x 3pol plug incl. 5-6V supply), 16 inputs (position contacts, foreclosure) and 16 outputs (signal lights, polarization relay); Additionally included: 2x plug (2pol plug-k), 1m 20pol ribbon cable, 2x 20pol cutting bracket.

Decoder MX636C with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1.8 A, 6 function outputs, energy storage connection also for 16 V ELKOS and gold caps, semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A ), FA3, FA4 as logic level outputs.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256

Decoder MX617F with 6-pin plug NEM651 interface, 13 x 9 x 2.5 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge a

Miniature sound decoder, E24 interface, not mfx capable, 19 x 8.7 x 2.8 mm, audio 1 W, 0.8 A.

Sound Decoder, 6-pin interface NEM 651, 14 x 10 x 2.6 mm, audio 1 W, 0.7 A, with 4 FU outputs.