ESU 51806 – Linear Servo, movement 4.5 mm, with microcontroller, 30cm wire,with fittings accessories

SwitchPilot Extension Adapter for ABC braking distances. Set of 2 pieces for a total of 4 brake sections. These adapter boards are simply plugged into the terminals of a SwitchPilot Extension module and greatly simplify the construction and wiring of ABC braking distances. Each adapter board can generate the signals for two braking sections. The ABC brake technology not only allows a gentle deceleration before signals, but also the triggering of functions during the signal stop. The sound functi

SwitchPilot adapter for common cathode signals. Set of 2 pieces for a total of 8 outputs. The SwitchPilot decoder can also be used to easily operate light signals in addition to turnout drives. In most of these cases modern light-emitting diodes are installed in these. In order to reduce the number of cables, the anode connections are usually coupled on the signal side in the case of multipoint signals. However, some signal manufacturers (for example Viessmann®) couple the cathode so that these

With the servo extension cable you can extend your precision servo drive by up to 75cm. 3-pin J / R male to female J / R / Futaba.

SwitchPilot 3 decoders are optimized for stationary use on your layout and can switch conventional double-coil turnout drives, light signals, magnetic decouplers, light bulbs or other stationary consumers. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 is multi-protocol capable and can be used with central

SwitchPilot 3 Plus decoders are optimized for stationary use on your layout and can switch conventional double-coil turnout drives, light signals, magnetic decouplers, light bulbs or other stationary consumers. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Plus is multi-protocol capable and can be use

SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo is multi-protocol capable and can be used with central units based on the Märklin® Motorola® system (e.g. 6021, Central Station

The compact SwitchPilot 3 Mini Decoder is designed for stationary use in hard-to-reach places on your layout and can switch a double-coil turnout drive or two magnetic uncouplers or a two-aspect light signal or two light bulbs or other stationary loads.The SwitchPilot 3 Mini features an innovative operating concept, consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Mini is multi-protocol compatible and can be used with both Märklin® Motorol

The compact SwitchPilot 3 Servo Mini decoder is designed for stationary use in hard-to-reach areas of your layout and can control an RC servo drive. The SwitchPilot 3 Servo Mini features an innovative operating concept consisting of a 4-line, backlit OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo Mini is multi-protocol compatible and can be used with both Märklin® Motorola® control units (e.g., 6021, Central Station®, or Mobile Station®) and DCC-compatible control un

Operating modes: DCC, Motorola® with up to 127 addresses, K83 compatible, supply by the digital central unit or separate DC or AC voltage transformer up to 18V AC. Outputs: 16 outputs, each with 250mA loadable, connection with removable terminal blocks, version as push / pull stage: The outputs can be switched individually against decoder ground or positive voltage, individual assignment of the decoder addresses to the outputs (mapping), lighting effects, brightness individually adjustable , Cro

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color white.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color violet.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color black.

ESU 51943 – RED Super thin cable, 0.5mm diameter, AWG36, 10m bundle

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color orange.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color green.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color Gray.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color yellow.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color brown.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color blue.

Cable set with 8-pin socket to NEM 652, DCC cable colors, 300mm length. If the locomotive to be converted does not have a digital interface, but you do not want to cut off the interface connector of the decoder, our cable sets 51950 or 51951 will help you: First install a suitable cable harness and then simply plug in the decoder. How to digitize the pros!

Cable set with 6-pin socket to NEM 651, DCC cable colors, 300mm length. If the locomotive to be converted does not have a digital interface, but you do not want to cut off the interface connector of the decoder, our cable sets 51950 or 51951 will help you: First install a suitable cable harness and then simply plug in the decoder. How to digitize the pros!

ESU 51952 – Cable USB-A 2.0 FTDI to RS232; 1.80m, for LokProgrammer

On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems. The dummy plug is plugged onto the Adat board 51959. DIP switches can be used to configure which function outputs should be switched on or off. The definition of the direction of travel is possible. The dummy plug is useful for converters who want to prepare their Track 0 or Track 1 locos digitally using the 51959 board, but do not want to install a LokSound 5L decoder