For difficult installation situations with limited space, particularly in N-gauge models, we recommend our miniature speaker, which requires only 10 mm x 12 mm of space. This speaker was selected by our audio engineers after extensive testing because it offers a good compromise between acceptable bass reproduction and volume. This miniature produces astonishingly high sound pressure levels – when combined with the appropriate sound capsule. The set includes four sound capsules of different heigh

This new "sugar cube" speaker, measuring 13mm x 18mm, is larger than the previous ESU speaker. Since the diaphragm is a good 40% larger, it can deliver significantly higher sound pressure. Both bass and mid-range and high-frequency reproduction are flawless. This speaker can be used anywhere our bass reflex speakers don't fit, but where the best possible bass reproduction is still important. The same principle applies to our new speaker: the larger the enclosure, the better the sound. We include

ESU 50442 – Loudspeaker 23mm, round, 100 Ohm, with sound chamber

ESU 50444 – Loudspeaker 40mm, round, 100 Ohm, with sound chamber

Lautsprecher 57mm rund 16 Ohm with Schallkapsel for Decoder LokSound XL

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

ESU 50447 – Two loudspeakers 16mm, oval, je 50 Ohm, with sound chamber

ESU 50448 – Loudspeaker 20mm x 40mm, square, 100 Ohm, with sound chamber

Interior lighting set with taillight, 255mm, 11 LEDs, "Warm White". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

The 380mm long, 15mm wide wagon interior lighting with the article number 50703 is intended for use in track-1 vehicles. It carries both white and yellow LEDs, which are separately adjustable in brightness. This allows you to set the desired color for the first time. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. Thanks to the digital interface (21MTC), a function decoder can be retrofitted at any time.

Model: small, easy-to-install module for the driver's cab. Consisting of a single warm white LED and control electronics.

Model: small, easy-to-install module for the tail light. Consisting of two red LEDs and control electronics.

The pantographs ensure optimum power consumption on all commercial vehicles. Simply stick it to the underside of the bogie and the preloaded wheel contacts touch the back of the wheel (wheel flange). Because each pantograph has two spring plates, one per axis. Suitable for all center distances. Suitable for H0 DC and AC or N-lane. Set with 8 pantographs is enough for 8 axles.

ESU 50708 – Digital LED lighting strip with integrated Digital decoder and taillight, 255mm, 11 LEDs, „warm-white“

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. The integrated ESU decoder can be used under Motorola® and DCC and also works on analog

The PowerPack supercapacitor can be connected to the 50700, 50702, 50708, and 50709 indoor lighting to reliably prevent low power flicker. Capacity 0.22F / 5.5V.

Interior lighting set with decoder, entrance and tail lights, 264 mm, separable, PowerPack option, 13 LEDs, warm white.With ESU's digital LED interior lighting, you can retrofit your N, TT, or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit your desired application.The digital interior lighting units are 264 mm long, 9 mm thick, and each equipped with 13 (!) LEDs. In addition to a warm white version (50718), there is also a board with yellow LEDs (

Interior lighting set with decoder, entry and tail lights, 264mm, divisible, PowerPack option, 13 LEDs, yellow.With ESU's digital LED interior lighting, you can retrofit your N, TT, or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit your desired application.The digital interior lighting units are 264 mm long, 9 mm thick, and each equipped with 13 (!) LEDs. In addition to a warm white version (50718), there is also a board with yellow LEDs (50719) s

Kiss 510524 Spur 1 E-Lok Traxx ll BR 185.2 | Betr.Nr.Re 482 040-3 Cargo ESU OVP | Zustand: Neu: Sonstige (siehe Artikelbeschreibung)

Kiss 510527 Spur 1 E-Lok TTraxx ll BR 185.2 | Betr.Nr.BR 185 595-6 ESU digital | Zustand: Neu

Roco aus 51232 E-Lok BR 110 239-1 DB Digital, ESU Geprüft Zurüstteile ohne OVP | Zustand: Gebraucht

Schönwitz 51647 Anschlusskabel ESU Switchpilot Servo 16-polig 2x8 Pin Maß 2,54mm | Zustand: Neu

ESU 51751 Diesellok 220 060 DB DC/AC Digital Sound NEW in OVP | Zustand: Neu