USB cable A / B, length 180 cm.

SX-Bus-Kabel 0,6 m

SX-Bus-Kabel 1,0 m

Cable for connecting SX components, length 2.0 m.

With the help of the SUSI adapter, you can conveniently connect SUSI modules with a connection cable with a standard plug, such as the DH SUSI sound module SH10A-2 or the DH SUSI energy storage device SP05A-2 or SUSI modules from competitors, to the programmer ,

Programming adapter.

Decoder 8 PINS cable fino NEM652

Decodificador nano con cables muy pequeño

The new eight-fold Doehler & Haass brake module enables asymmetrical digital voltages to be generated at low cost. For each track section you can set separately whether the asymmetry for braking or for slow travel should be generated. Since the asymmetry is only generated when the track signal is also evaluated by the decoder, there is no difference in brightness when lighting when entering or exiting the braking section. Dimensions [mm]: 102 x 63 x 24, operating mode SX1, SX2, DCC, total load c

SX-Busverteiler

Decoder DH05C-0 without connection cable DCC + Selectrix

Decoder DH05C-3 wire DCC + Selectrix

Decoder, without wires, 0.5A.

Decoder, with cable, 0.5A.

DH06A Fahrzeugdecoder Miniaturmotoren 6V

Vehicle decoder DH10C-0 2nd generation for SX1, SX2, DCC and MM without connecting wires.Operating mode SX1, SX2, DCC, MM, DC-analogDimensions [mm] 12.7 * 8.9 * 1.4Total load 1.5 AMax. Motor current 1.5 AMax. Driving voltage 30 VFunction outputs light: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 300 mA eachFunction outputs: AUX5, AUX6 unamplified *)With SUSI interface (if AUX5 / AUX6 deactivated)*) Unamplified function outputs AUX3

Vehicle decoder DH10C 2nd generation for SX1, SX2, DCC and MM with ribbon cable for NEM 651.Operating mode SX1, SX2, DCC, MM, DC-analogDimensions [mm] 12.7 * 8.9 * 1.4Total load 1.5 AMax. Motor current 1.5 AMax. Driving voltage 30 VFunction outputs light: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 300 mA eachFunction outputs: AUX5, AUX6 unamplified *)With SUSI interface (if AUX5 / AUX6 deactivated)*) Unamplified function outputs A

Vehicle decoder DH10C 2nd generation for SX1, SX2, DCC and MM with connection cable for NEM 651.Operating mode SX1, SX2, DCC, MM, DC-analogDimensions [mm] 12.7 * 8.9 * 1.4Total load 1.5 AMax. Motor current 1.5 AMax. Driving voltage 30 VFunction outputs light: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 300 mA eachFunction outputs: AUX5, AUX6 unamplified *)With SUSI interface (if AUX5 / AUX6 deactivated)*) Unamplified function outpu

Vehicle decoder DH10C 2nd generation for SX1, SX2, DCC and MM with 6 connection wires, length approx. 145 mm.Operating mode SX1, SX2, DCC, MM, DC-analogDimensions [mm] 12.7 * 8.9 * 1.4Total load 1.5 AMax. Motor current 1.5 AMax. Driving voltage 30 VFunction outputs light: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 300 mA eachFunction outputs: AUX5, AUX6 unamplified *)With SUSI interface (if AUX5 / AUX6 deactivated)*) Unamplified f

Vehicle decoder 1.5 A (2nd generation) for the 6-pole interface. Strongly reduced dimensions, higher total load capacity and higher motor current (1.5 A), AUX3 and AUX4 as amplified function outputs (1.0 A), AUX5 and AUX6 as unamplified function outputs (alternative to SUSI interface), about five times buffer capacity (therefore longer contact interferences can be passed without data loss). Operating mode SX1, SX2, DCC, MM, DC-analog, total load 1.5 A, maximum motor current 1.5, maximum driving

21 pins decoder for RENFE 1300.

Decoder without connector, 1.5A.

Decoder, 8-pin plug, 1.5A.

Decoder with cable, 1.5A.