BS-WR

Noch 50416 Kork-Platte 2 St., 3 mm hoch

Noch 50410 Kork-Gleisbettung 6 St., 3 mm hoch

Color Light Home Signal with a Color Light Distant Signal

Model: HO gauge. Track end. Two yellow braking bumpers which are fastened on braking tracks placed parallel to the running rails and deactivated by tilting them manually. Model without function.This building kit contains: 30 single parts in 1 colour, 1 decoration and 1 construction instruction.Dimensions: 50 x 36 x 27 mm (2 x)Epoch: V

PIKO A-Track w. Roadbed R9 908 PU6

Model: HO gauge. ST-227 Code 100 Setrack curved track with wooden sleeper replica, radius 438 mm, angle 11.25 degrees.The Setrack Code 100 rails with a profile height of 2.5 mm can be used with NEM 310 as well as with all flatter wheel sets like the RP 25 without any problems. The parallel track spacing of the Setrack Code 100 track system is 67 mm. The Setrack track system offers the possibility to easily connect and disconnect the tracks, also the wiring is very easy. The Setrack Code 100 trac

Metal Rail Joiners, 24 pcs

Crossing 15°/239mm

Bumper

Model: HO gauge DC. Track fixings "K" (20 pieces)The HO Elite track system is suitable for: NEM wheel sets, RP 25 wheel sets and older vehicles with wheel flanges up to approx. 1.2 mm.Low rail profile (2.07 mm = code 83) with extremely small head width (0.8 mm), profiles and rail connectors in prototypical coloring (burnished), the small iron corresponds to the typical superstructure "K", thus suitable for all model railroading epochs . Switch construction without annoying joints (spring tongues

Model: HO gauge. Two switch box scaffolds for depots and sidings, painted finished model.

Model: HO gauge. Two socket scaffolds for heating and charging railway vehicles, painted finished model.

Color Light Home Signal with a Color Light Distant Signal

Model: HO gauge. Finished model painted. Contents: 10 pieces.Balises are transponders for the Europe-wide standardized train control system ETCS (European Train Control System) and serve to transfer information from the route to the vehicle. They are often laid twice to recognize the direction of travel and to guarantee that the information is transmitted reliably. Since a balise can only transmit limited amounts of data, several balises are installed one after the other or combined into groups

Model: HO gauge DC. Flexi sleeper band length 220 mm.The HO Elite track system is suitable for: NEM wheel sets, RP 25 wheel sets and older vehicles with wheel flanges up to approx. 1.2 mm.Low rail profile (2.07 mm = code 83) with extremely small head width (0.8 mm), profiles and rail connectors in prototypical coloring (burnished), the small iron corresponds to the typical superstructure "K", thus suitable for all model railroading epochs . Switch construction without annoying joints (spring ton

Model: HO gauge. ST-200 Code 100 Setrack track straight with wooden sleeper replica, length 168 mm.The Setrack Code 100 rails with a profile height of 2.5 mm can be used with NEM 310 as well as with all flatter wheel sets like the RP 25 without any problems. The parallel track spacing of the Setrack Code 100 track system is 67 mm. The Setrack track system offers the possibility to easily connect and disconnect the tracks, also the wiring is very easy. The Setrack Code 100 tracks fit easily with

Curved Track R3/30°, 6 pcs

Model: Gauge HO 16.5mm DC. Track with bedding.

Model: HO gauge. Consisting of transformer, console, feed cables, insulators and mast switch. Suitable for the mounting on the following Viessmann tower masts: Items 4114, 4115, 4116, 4117. Suitable suspended box girders items 4160, 4161. Corresponding spanbridges items 4162, 4163.

PIKO A-Track w. roadbed R4 546bPU6

Model: HO gauge. With a slow motion drive as well as a freely usable closing contact up to 2 A. The control of the drive is followed by an impulse of 16 V. Due to the built-in switch impulses DC operation is possible, too. Current consumption at the point of switching is 0,7 A. Technical data: Operating displacement: 0,5 cm, actuation wire: 9 cm, actuation power: 0,1 N (ca. 10 g), actuation speed: approx. 1 cm/s.Dimensions drive unit: Ø 1,3 cm, L 6,79 cm, cover plate: L 1,5 x W 1,5 cm.

Designed to be used with H0/00 Code 100 track systems. Also compatible with 0 Gauge Bullhead and 0-16.5/0n30 track systems.

PIKO A-track w roadbed, Transition track to ROCO** GeoLine