Interior lighting set with taillight, 255mm, 11 LEDs, "Warm White". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

The 380mm long, 15mm wide wagon interior lighting with the article number 50703 is intended for use in track-1 vehicles. It carries both white and yellow LEDs, which are separately adjustable in brightness. This allows you to set the desired color for the first time. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. Thanks to the digital interface (21MTC), a function decoder can be retrofitted at any time.

Model: small, easy-to-install module for the driver's cab. Consisting of a single warm white LED and control electronics.

Model: small, easy-to-install module for the tail light. Consisting of two red LEDs and control electronics.

The pantographs ensure optimum power consumption on all commercial vehicles. Simply stick it to the underside of the bogie and the preloaded wheel contacts touch the back of the wheel (wheel flange). Because each pantograph has two spring plates, one per axis. Suitable for all center distances. Suitable for H0 DC and AC or N-lane. Set with 8 pantographs is enough for 8 axles.

ESU 50708 – Digital LED lighting strip with integrated Digital decoder and taillight, 255mm, 11 LEDs, „warm-white“

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. The integrated ESU decoder can be used under Motorola® and DCC and also works on analog

The PowerPack supercapacitor can be connected to the 50700, 50702, 50708, and 50709 indoor lighting to reliably prevent low power flicker. Capacity 0.22F / 5.5V.

Interior lighting set with decoder, entrance and tail lights, 264 mm, separable, PowerPack option, 13 LEDs, warm white.With ESU's digital LED interior lighting, you can retrofit your N, TT, or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit your desired application.The digital interior lighting units are 264 mm long, 9 mm thick, and each equipped with 13 (!) LEDs. In addition to a warm white version (50718), there is also a board with yellow LEDs (

Interior lighting set with decoder, entry and tail lights, 264mm, divisible, PowerPack option, 13 LEDs, yellow.With ESU's digital LED interior lighting, you can retrofit your N, TT, or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit your desired application.The digital interior lighting units are 264 mm long, 9 mm thick, and each equipped with 13 (!) LEDs. In addition to a warm white version (50718), there is also a board with yellow LEDs (50719) s

The SwitchPilot Extension Module only works in conjunction with a SwitchPilot. When plugged in at the side, it is supplied with power directly from the SwitchPilot. It contains a total of 4 dual relays (2 x UM), each of which is permanently assigned to a transistor output pair of the SwitchPilot. The position of the respective relay depends directly on the switching state of this output pair. With the help of the relay, loads can be switched galvanically isolated from the rest of the rail circui

Miniature servo, supply voltage: 4.8V - 6.0V DC (nominal 5V), power: up to 1.0 kg / cm, length of connecting cable: approx. 120mm, accessories: servo mount, special servo horn for positioning wire, cross horn, mounting screws, positioning wire, drilling template, dimensions : 26mm x 13mm x 24mm.

Miniature servo, supply voltage: 4.8V - 6.0V DC (nominal 5V), power: up to 1.0 kg / cm, length of connecting cable: approx. 120mm, accessories: servo mount, special servo horn for positioning wire, cross horn, mounting screws, positioning wire, drilling template, dimensions : 26mm x 13mm x 24mm.

SwitchPilot Extension Adapter for ABC braking distances. Set of 2 pieces for a total of 4 brake sections. These adapter boards are simply plugged into the terminals of a SwitchPilot Extension module and greatly simplify the construction and wiring of ABC braking distances. Each adapter board can generate the signals for two braking sections. The ABC brake technology not only allows a gentle deceleration before signals, but also the triggering of functions during the signal stop. The sound functi

SwitchPilot adapter for common cathode signals. Set of 2 pieces for a total of 8 outputs. The SwitchPilot decoder can also be used to easily operate light signals in addition to turnout drives. In most of these cases modern light-emitting diodes are installed in these. In order to reduce the number of cables, the anode connections are usually coupled on the signal side in the case of multipoint signals. However, some signal manufacturers (for example Viessmann®) couple the cathode so that these

With the servo extension cable you can extend your precision servo drive by up to 75cm. 3-pin J / R male to female J / R / Futaba.

SwitchPilot 3 decoders are optimized for stationary use on your layout and can switch conventional double-coil turnout drives, light signals, magnetic decouplers, light bulbs or other stationary consumers. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 is multi-protocol capable and can be used with central

SwitchPilot 3 Plus decoders are optimized for stationary use on your layout and can switch conventional double-coil turnout drives, light signals, magnetic decouplers, light bulbs or other stationary consumers. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Plus is multi-protocol capable and can be use

SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo is multi-protocol capable and can be used with central units based on the Märklin® Motorola® system (e.g. 6021, Central Station

The compact SwitchPilot 3 Mini Decoder is designed for stationary use in hard-to-reach places on your layout and can switch a double-coil turnout drive or two magnetic uncouplers or a two-aspect light signal or two light bulbs or other stationary loads.The SwitchPilot 3 Mini features an innovative operating concept, consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Mini is multi-protocol compatible and can be used with both Märklin® Motorol

The compact SwitchPilot 3 Servo Mini decoder is designed for stationary use in hard-to-reach areas of your layout and can control an RC servo drive. The SwitchPilot 3 Servo Mini features an innovative operating concept consisting of a 4-line, backlit OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo Mini is multi-protocol compatible and can be used with both Märklin® Motorola® control units (e.g., 6021, Central Station®, or Mobile Station®) and DCC-compatible control un

Operating modes: DCC, Motorola® with up to 127 addresses, K83 compatible, supply by the digital central unit or separate DC or AC voltage transformer up to 18V AC. Outputs: 16 outputs, each with 250mA loadable, connection with removable terminal blocks, version as push / pull stage: The outputs can be switched individually against decoder ground or positive voltage, individual assignment of the decoder addresses to the outputs (mapping), lighting effects, brightness individually adjustable , Cro

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color white.