Extension track set for Digital Starter Set

The complete kit contains all necessary stands, track segments and a detailed assembly instruction. The illustrated tracks are not included.Track radius 360 mm / 437.5 mm, 1- or 2-track, base circle, 9 segments = 1 1/2 circles, construction height: 130.5 mm, segment width: 165 mm, gradient inside: 3.8 %, gradient outside: 3.17 %, outer diameter (outer dimension from stand to stand): 998 mmSuitable for Märklin M, K, C and other tracks with these radii.Laggies track helix - The space-saving and st

Curved track R5, 30°

The complete kit contains all necessary stands, track segments and a detailed assembly instruction. The illustrated tracks are not included.track radius 420 /483 mm, 1- or 2-track, construction circle, 6 segments = 1 circle, floor height: 87 mmSuitable for Fleischmann Profi and other tracks with these radii.Laggies track helix - The space-saving and stable method to change the level. A track helix is a spiral in which a train moves from one level to a lower or higher level. So the train moves u

For use with tension lock couplers.

Single Light for Maintenance Facilities

Model: HO gauge. Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. Patented base socket. Very simple mounting and wiring. With 2 LEDs, maintenance free. Signal pictures Hp0 and Hp1. Suitable control module: Item 5221.Dimensions: height 7,9 cm.

Roller blocks and cleaning felts for the Proses roller test stand in H0. Contains four cleaning felts in different designs and four roller blocks.

Model: HO gauge. Illuminated bumper, wireless. Can be used with common H0 and 00 gauge tracks without ballast.

The parallel track gauge was developed to ensure the same distance between adjacent and parallel tracks.

The aluminium base is powered by the track it is placed on, and allows the loco to run and get on the track smoothly and properly. Also suitable for wagons.Both ends are open to give access to both sides.Length: 48 cm

Lattice Mast Light

Model: HO gauge. C-Track Turnout Motor with Decoder (4568) plus Turnout Lantern (4555).This fully assembled turnout motor is the ideal plug-and-play solution for the Märklin C-Track system. It combines a reliable electric drive with an integrated digital decoder and a realistically illuminated turnout lantern for a particularly authentic appearance.Highlights:Completely assembled: Drive, decoder, and lantern pre-assembled – simply plug in and go.Integrated digital decoder: No additional decoder

Transition rail joiners

Turnout left Wl10

Risers are generally used to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with Foam Nails and attach with glue.

Track Set C

Cork track bedding, 18 pieces each 3.6 x 50 cm (total length 9 m), 3 mm high. These cork track beds for TT and H0m gauges are a real model railroad classic: They are ideally suited as a stable and noise-absorbing base for bed-less model railroad tracks. The track beds are easy to lay.

Magnetic decoupler for Kadee couplings for installation in the HO track. Track not included in delivery.

Contents: Electromagnetic decoupler with mounting plate and screws. For the magnetic uncoupling of Kadee couplings. 16 volt direct current with at least 3 amps is recommended for connection. Do not continuously supply the uncoupler with power for more than 2 minutes to avoid overheating. Track not included in delivery.

For HOn3, HO, S, On3 & O Scale Couplers. Adjust trip pin to the correct height by gently squeezing with these specially designed pliers. The pliers have jaw surfaces that are curved and smooth. Adjusting the height of your Coupler Trip Pins is easier because the pliers surfaces conform to the bend of the trip pins and prevent them from kinking when bending or straightening.

10 Plastic Draft Gearboxes & Lids included with NO.5, 58, 20-Series (medium & long shank), Couplers. Also works with medium & long shank Whisker® Couplers.

Contents: measuring device, Kadee couplings No. 5 and 58, screw, springs and washers.Installation and adjustment aid for Kadee couplings for measuring and correcting the correct coupling height.

Single-pole cable