ESU 59315 – LokPilot 5 L DCC/MM/SX/M4, Pinheader with adapter

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

Model: HO scale. H / V signal system distant signal with 4 lights (yellow / green / yellow / green) of the DB. Fine scale product with LED. Structure and railing made of brass, fine details made of 3D-printed material. Resistors up to 16 V (direct current) are included.

Model: HO gauge. The satellites are used to locate the vehicle. By determining the transit time of the ultrasonic signal from the vehicle to all satellites, the position of the vehicle can be determined to an accuracy of at least 10 mm. Depending on the size of the system, at least 3 satellites are required for fully automatic Car System Digital operation.

LokPilot 5 Fx function decoder DCC/MM/SX PluX22 NEM658The LokPilot 5 Fx is a function decoder without a motor output and is therefore perfect for installation in control cars or function models. Because it speaks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital centers. It shares its flexible function key assignment and the various light effects with the other LokPilot 5 decoders from ESU.The LokPilot 5 Fx is supplied in three versions: In addition to

A Plux22 (NEM658) DCC decoder suitable for models with a Plux22 DCC decoder socket.

Decoder Next18 NEM 662 - e.g. for E77, BR 42, BR 52. 14.2 x 9.2 x 3 mm

The new adapter board for decoders with PluX22 interface is suitable for anyone who wants to quickly digitize their locomotives and equip them with many functions quickly and without much soldering. The adapter board with the compact dimensions of 32.5mm x 15.5mm is additionally equipped with a break-off fastening strap. All outputs according to VHDM or NEM standard are available as solder connections. Already soldered connection cables with approx. 20 cm length for the most important contacts e

ESU 50119 Ecos Netzteil

Quick Loadboard for many Decoders

MN160 digital decoder 0.5A 7 6-pin NEM651 interface at right angles. Dimensions: 13 x 7.5 x 1.6 mm; single-sided assembly. Version of the MN160 with 6-pin pins at right angles: 7 free wires (2x motor, 2x track, front light (FA0v), rear light (FA0r), common positive pole).Zimo non-sound decoders are technologically equivalent to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product

MN160 digital decoder 0.5A 7 stranded wires. Dimensions: 13 x 7.5 x 1.6mm; equipped on one side. Wired variant of the MN160: 7 free wires (2x motor, 2x rail, front light (FA0v), rear light (FA0r), common positive pole).Zimo non-sound decoders are technologically equivalent to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also largely (

Two Dumbos, high volume and good bass reproduction, the two Dumbo S in series, therefore suitable for Zimo large-scale-sound Decoders (which operate the speakers with 10V instead of 5V) when a largeer Visaton speaker no place. 50 x 15 x 14 mm, 16 Ohm / 2 W.

Two Dumbos in a box, higher volume (only suitable for 3 watt sound Decoders), but relatively little resonance volume, therefore a little weaker bass reproduction, 40 x 22 x 9 mm, 4 ohm / 2 W.

Connection board at the I2C bus for 16 signal lights, with screw terminals.

Digitally switchable clutch H0E for double tractions. Matching counterpart: Further H0e-D2 on the second vehicle of the double traction. All H0E couplings are suitable for H0E cars with a stern shaft.Technical data: Voltage: 12-22V DC, maximum current: 90mA, maximum load duration: 10 seconds, bobbin: brass, mechanics: permanent magnet, clutch recording: H0E, buffer distance: Corresponds to the buffer spacing of common clutches, operating temperature: -20 to 80 ° C . The clutch may be max. 10 sec

Digitally switchable coupling H0E for single tractions. All H0E couplings are suitable for H0E cars with a stern shaft.Technical data: Voltage: 12-22V DC, maximum current: 90mA, maximum load duration: 10 seconds, bobbin: brass, mechanics: permanent magnet, clutch recording: H0E, buffer distance: Corresponds to the buffer spacing of common clutches, operating temperature: -20 to 80 ° C . The clutch may be max. 10 seconds are loaded.The Digital clutches allow the uncoupling of cars to free route.

CAN bus cable 8pol 3 m length.

CAN bus cable 8pol 1 m length.

Finished CAN bus cable with plugs attached on both sides (also called driving cord) in 15 cm in length. The very short version is specifically suitable for connecting two side-by-side drivers.The Zimo Bus System, based on the industrial-proven CAN protocol, is the most powerful and reliable and reliable under the Digital system bus systems with at least 1000 messages / sec. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connect

MN180N18 Digital Decoder 0.7A Next18. 4 + 2 FA 4 amplified outputs + 2 SUSI + 2 logic level outputs according to the VHDM standard Direct connection of 15 V energy storage to solder pads (up to 15,000 µF).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointl

Amplifier module for a logic level output of a Decoder. Most ZIMO Decoders have such logic level outputs in addition to the normal function outputs, which are switched between 0 V (for OFF and 5V (for a) and need not be charged, but need an external amplifier. Mostly logic level outputs are an alternative use of the SUSI connections (Clock and Data), and are activated by CV # 124, bit 7 = 1. The output of the M4000Z supplies up to 0.5 A.

GER: PIKO SmartDecoder XP S TT BR 62 Next18 inkl. Lautsprecher

Basic device MX10EC + Roco WLAN mouse + USB stick + CAN cable + 8Pola1m + power supply NG300 + router + 3x battery + operating instructions. MX10