MN170F digital decoder 0.7A 6-pin interface NEM651 on wires. Variant of the MN170, 6-pin interface NEM651 on wires, 1 free wire.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same d

Decoder software updates and loading of sound projects directly from the computer. The Zimo KLUG is the new compact loading and update device for Zimo decoders. It is versatile, handy, and affordable – yet it forgoes a display and requires only a connection to a computer (Windows) and decoder loading and update software. A decoder can either be plugged directly into the Zimo KLUG or – remaining in the vehicle without opening it – connected via the track. The MSTAPK and MSTAPG boards can also be

DC power supply 18V, 2.22A, 40 watts, for Mxulfa

Function Decoder, 25 x 15 x 4 mm, 1.8 A, 10 function outputs, energy storage terminal, variable low voltage output, 10 stranded wires.

Sound Decoder with NEM 658 16-pin PLUX16 interface, 30 x 15 x 4 mm, 13 connecting wires (2 x rail, 2 x motor, acc. Plus, mass, Elko Plus, 4 foot outputs, 2 x speakers), 6 solder Pads (other FU outputs), direct connection energy storage 15 V (unlimited capacity) on Plux pin header.

GER: RD 4000+ für el. Verbraucher

With the CabControl, we combine the ease of use of our popular MobileControl Pro handheld controller with the Integrated Control Unit (ICU) base station, which includes a powerful booster, a high-quality DCC control center with Railcom® and RailComPlus®, and a complete Wi-Fi access point.With its 7A output power, the CabControl is an ideal control center for model railroaders of all gauges who seek simple manual operation via radio, but don't want to forgo the convenience of automatic locomotive

This adapter board provides a comfortable connection of your LokSound 5 L or LokPilot 5 L decoder. The decoder is plugged directly into the socket connectors. On the output side, the most important connections can be contacted directly at robust screw terminals - without soldering! A socket for the optional connection of a SUSI module as well as pin headers for the direct connection of four RC servos complete the equipment. This adapter board enables a professional, clean wiring of your locomoti

50 pieces 6-pin modular plug (Western Strecker) for mounting.The ZIMO Bus System, based on the industrial-proven CAN protocol, is the most powerful and reliable under Digital system bus systems with at least 1000 messages / sec. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s. The protocol originated from automotive

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

Sound Decoder NEM 652 8-pin interface on wires, 19 x 11 x 3.1 mm, with 6 foot outputs, 13 connecting wires (2 x rail, 2 x motor, 2 x acc. Plus, mass, 4 FU outputs, 2 x speakers), 2 solder pads (other FU outputs).

Z21 multiMAUS

Doehler & Haass SD22 vehicle sound decoder PluX22 2.0A SX1 SX2 DCC MM DC AC. Version with 8-pin interface connector.For optional operation with a conventional DC controller, digital systems according to SelecTRIX 1 and 2 or according to the NMRA standard (DCC)Switching between analogue and digital operation takes place automaticallyIn digital operation, the last programmed one is used system used (it is not switched automatically!)SelecTRIX 1 31 speed steps, 100 addressesSelecTRIX 2 127 speed st

Permanent magnet such as 220450, for Anker 200680, D = 18.0mm, for engine plate 204900 (small disc collector motor). For the conversion of old Märklin® all-electric motors you need a permanent magnet. It replaces the previous field winding and helps your old locomotives in conjunction with a LokSound or LokPilot decoder to a driving behavior that you would never have expected the locomotives! In total, there are four different magnets, which is needed exactly depends on the anchor type. The numb

Permanent magnet such as 220560, for armature 217450, D = 24.5mm, for motor plates 216730, 211990, 228500 (large disc collector motor). For the conversion of old Märklin® all-electric motors you need a permanent magnet. It replaces the previous field winding and helps your old locomotives in conjunction with a LokSound or LokPilot decoder to a driving behavior that you would never have expected the locomotives! In total, there are four different magnets, which is needed exactly depends on the an

SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo is multi-protocol capable and can be used with central units based on the Märklin® Motorola® system (e.g. 6021, Central Station

Basic device MX10 + Fahrer MX33FU + USB stick + CAN cable + 8pola1m + power supply NG300 + operating instructions (MX10, MX33)

Basic device MX10EC + Fahrer MX33FU + USB stick + CAN cable + 8pola1m + power supply NG300 + operating instructions (MX10, MX33)

22-pin SMD pin header (as it is mounted on Plux Decoders as a plug)

Function Decoder, 20 x 11 x 3.5 mm, 1.0 A, 8 function outputs, with 16-pin PLUX16 interface NEM658.

Decoder MX636VD with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1.8 A, 6 function outputs, energy storage connection also for 16 V ELKOS and gold caps, semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A ), with additional adjustable low voltage.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving st

MN300R digital decoder 1.0A 8-pin interface NEM652 on wires. Variant of the MN300, 8-pin interface NEM652 on wires, 3 free wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same

MN170N digital decoder 0.7A 6-pin interface NEM651 on decoder no wires. 6 FA 6-pin interface NEM651 on decoder, no wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same driving

Rundautspeaker 28mm x 6mm, with intermediate resonant body 8 ohm / 1 W.