Magnetic decoupler for Kadee couplings for installation in the HO track. Track not included in delivery.

Contents: Electromagnetic decoupler with mounting plate and screws. For the magnetic uncoupling of Kadee couplings. 16 volt direct current with at least 3 amps is recommended for connection. Do not continuously supply the uncoupler with power for more than 2 minutes to avoid overheating. Track not included in delivery.

For HOn3, HO, S, On3 & O Scale Couplers. Adjust trip pin to the correct height by gently squeezing with these specially designed pliers. The pliers have jaw surfaces that are curved and smooth. Adjusting the height of your Coupler Trip Pins is easier because the pliers surfaces conform to the bend of the trip pins and prevent them from kinking when bending or straightening.

10 Plastic Draft Gearboxes & Lids included with NO.5, 58, 20-Series (medium & long shank), Couplers. Also works with medium & long shank Whisker® Couplers.

Contents: measuring device, Kadee couplings No. 5 and 58, screw, springs and washers.Installation and adjustment aid for Kadee couplings for measuring and correcting the correct coupling height.

Place this decoupler on a straight section of track between the rails. Suitable for installation on Code 100 tracks. When installing on Code 83, 70, 55 or 40 tracks, the sleepers must be cut out. The track is not included.

Place this decoupler on a straight section of track between the rails. Suitable for installation on Code 83 tracks. When installing on code 70, 55 or 40 tracks, the sleepers must be cut out. The track is not included.

Contents: A permanent magnet and a steel reinforcement plate with English instructions, dimensions 52 x 39 x 5 mm. Magnetic decoupler for Kadee couplings for installation under the track. Suitable for many gauges from H0 to 0. Because of the thicker sleepers and the higher rail in track 0, it may be necessary to use several magnets and a reinforcement plate. On some tracks, the bottom of the sleepers may need to be shortened to bring the magnet (s) closer to the rails. Track not included in deli

There are many model builders who want to uncouple manually, and Kadee® offers the combination of manual uncoupler and spring installation aid. The tool has a "pointed" end for manual uncoupling of couplings No. 118 and No. 119. The other end is for other Kadee couplings. This is also suitable for installing springs.

Contents: measuring device, Kadee couplings No. 148 and 158, screw, springs and washers.Insulated installation and adjustment aid for Kadee couplings, including whisker couplings, for measuring and correcting the correct coupling height.

Kadee 3099 Decal Paper 8-1/2 x 11

Kadee 17 Kupplung kurz NEM 362 (2 Paar)

Kadee 18 Kupplung mittel NEM 362 (2 Paar)

Kadee 19 Kupplung lang NEM 362 (2 Paar)

Kadee 2020 Ajax Type Brake Wheels pkg(8)

Kadee 2040 Ajax Type Brake Wheels pkg(8)

Contents: 1 pair of couplings with springs and coupling shaft, middle coupling head made of metal.Medium Centerset Shank = the coupling Kadee No. 805 is a universal, medium-length coupling with a normal coupling height, the coupling shaft is attached in the middle of the head. The clutch is made of metal. The Magne-Matic® couplings can be uncoupled with a magnet under the track.

2Paar

2Paar

1St

1St

12St

12St

Standard head Whisker metal couplers (x4). Short.