Dimensions [mm] 14.0 * 12.0 * 5.5, impedance 8 ohms, max. power 0.8 W, no sound box required.Installation recommendations:In general, the recommendation is to install the loudspeakers far away from the engine in order to:to avoid inadmissible heating of the loudspeakers andto protect the loudspeaker magnets from demagnetization by the sometimes very strong motor magnets (e.g. Roco).Please note the installation recommendations for the LS1308 speaker:One side of the speaker is the membrane (silver

Square loudspeaker, 8 ohm. 15x11 mm.

Doehler & Haass M21-0 connection adapter 21-pin interface without connecting wiresDimensions [mm] (without pins) 15.0 * 16.0 * 0.6Dimensions [mm] (with pins) 15.0 * 16.0 * 6.7

Doehler & Haass M21-3 Connection adapter 21-pin interface with 11 connection wires, length approx. 145 mm.Dimensions [mm] (without pins) 15.0 * 16.0 * 0.6Dimensions [mm] (with pins) 15.0 * 16.0 * 6.7

This adapter enables the connection of motorized point machines (two wires, change of direction of rotation by reversing the polarity) to our function decoder. A separate adapter is required for each motorized point machine. All properties of the function decoder (adjustable pulse time, short-circuit protection, etc.) are retained.

N18-G-0 Anschlussadapter Next18 groß ohne Anschlusskabel

Next18 to NEM652 adapter.

Doehler & Haass N18-G-2 connection adapter Next18 large with connection cable NEM 652 and with 2 connection strands, length approx. 145 mm.Dimensions [mm] 14.3 * 10.2 * 2.0

Doehler & Haass N18-G-3 connection adapter Next18 large with 11 connection wires length approx. 145 mm.Dimensions [mm] 14.3 * 10.2 * 2.0

NEM 651 Decoder Flachbandkabel

Programmier-Adapter

PD05A Nano-Lokdecoder ohne Anschlusskabel

Decoder mini, 6-pin direct plug, 0.5A.

Decoder mini, 6-wires, 0.5A.

Doehler & Haass PD05A-4 Nano locomotive decoder for 6-pole interfaces, NEM 651Nano locomotive decoder 0.5 AMode of operation SX1, SX2, DCC -not DC analog, not MMDimensions [mm]  5.0 * 7.9 * 2.5Total load capacity  0.5 AMax. Motor current  0.5 AMax. Driving voltage  18 V2 light outputs, dimmable  150 mA eachProduct features and functionsFor optional operation with digital systems according to SelecTRIX 1 and 2 or according to NMRA standard (DCC)In digital mode the last programmed system is used (

PD06A Lokdecoder für Miniaturmotoren ohne Anschlusskabel

PD06A Lokdecoder für Miniaturmotoren mit 10 Anschlusslitzen

A new Doehler & Haass decoder developed exclusively for Modellbahn Union. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be used for both normal DC motors and coreless motors. Switching from analogue to digital operation takes place automatically.The vehicle decoders support braking with asymmetrical di

A new Doehler & Haass decoder developed exclusively for Modellbahn Union / DM-Toys, adapted to the needs of N-gauge model railroaders. As with all comparable Doehler & Haass decoders, the driving characteristics of this decoder are at an excellent level. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be

PD12A-0 vehicle decoder DCC without connection cable, without connector.Operating mode DCC, DC analogDimensions [mm] 24.2 * 11.0 * 2.4Total load capacity 1.0 AMax motor current 1.0AMax. driving voltage 30 V2 light outputs, each dimmable 150 mA2 additional outputs, dimmable 300 mA eachFor optional operation with a conventional direct current driving device or according to the NMRA standard (DCC)Switching between analog and digital operation is automaticDCC Short addresses (1-127), long addresses

Decoder NEM652 (8 pins), 1A.

Decoder with wires, 1A.

Decoder PluX12, 1A.

Decoder Next18 (18 pins), 1A.