Interior lighting set with decoder, entrance and tail lights, 264 mm, separable, PowerPack option, 13 LEDs, warm white.With ESU's digital LED interior lighting, you can retrofit your N, TT, or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit your desired application.The digital interior lighting units are 264 mm long, 9 mm thick, and each equipped with 13 (!) LEDs. In addition to a warm white version (50718), there is also a board with yellow LEDs (

Interior lighting set with decoder, entry and tail lights, 264mm, divisible, PowerPack option, 13 LEDs, yellow.With ESU's digital LED interior lighting, you can retrofit your N, TT, or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit your desired application.The digital interior lighting units are 264 mm long, 9 mm thick, and each equipped with 13 (!) LEDs. In addition to a warm white version (50718), there is also a board with yellow LEDs (50719) s

Kiss 510524 Spur 1 E-Lok Traxx ll BR 185.2 | Betr.Nr.Re 482 040-3 Cargo ESU OVP | Zustand: Neu: Sonstige (siehe Artikelbeschreibung)

Kiss 510527 Spur 1 E-Lok TTraxx ll BR 185.2 | Betr.Nr.BR 185 595-6 ESU digital | Zustand: Neu

Roco aus 51232 E-Lok BR 110 239-1 DB Digital, ESU Geprüft Zurüstteile ohne OVP | Zustand: Gebraucht

Schönwitz 51647 Anschlusskabel ESU Switchpilot Servo 16-polig 2x8 Pin Maß 2,54mm | Zustand: Neu

ESU 51751 Diesellok 220 060 DB DC/AC Digital Sound NEW in OVP | Zustand: Neu

The SwitchPilot Extension Module only works in conjunction with a SwitchPilot. When plugged in at the side, it is supplied with power directly from the SwitchPilot. It contains a total of 4 dual relays (2 x UM), each of which is permanently assigned to a transistor output pair of the SwitchPilot. The position of the respective relay depends directly on the switching state of this output pair. With the help of the relay, loads can be switched galvanically isolated from the rest of the rail circui

Miniature servo, supply voltage: 4.8V - 6.0V DC (nominal 5V), power: up to 1.0 kg / cm, length of connecting cable: approx. 120mm, accessories: servo mount, special servo horn for positioning wire, cross horn, mounting screws, positioning wire, drilling template, dimensions : 26mm x 13mm x 24mm.

Miniature servo, supply voltage: 4.8V - 6.0V DC (nominal 5V), power: up to 1.0 kg / cm, length of connecting cable: approx. 120mm, accessories: servo mount, special servo horn for positioning wire, cross horn, mounting screws, positioning wire, drilling template, dimensions : 26mm x 13mm x 24mm.

ESU 51806 – Linear Servo, movement 4.5 mm, with microcontroller, 30cm wire,with fittings accessories

SwitchPilot Extension Adapter for ABC braking distances. Set of 2 pieces for a total of 4 brake sections. These adapter boards are simply plugged into the terminals of a SwitchPilot Extension module and greatly simplify the construction and wiring of ABC braking distances. Each adapter board can generate the signals for two braking sections. The ABC brake technology not only allows a gentle deceleration before signals, but also the triggering of functions during the signal stop. The sound functi

SwitchPilot adapter for common cathode signals. Set of 2 pieces for a total of 8 outputs. The SwitchPilot decoder can also be used to easily operate light signals in addition to turnout drives. In most of these cases modern light-emitting diodes are installed in these. In order to reduce the number of cables, the anode connections are usually coupled on the signal side in the case of multipoint signals. However, some signal manufacturers (for example Viessmann®) couple the cathode so that these

With the servo extension cable you can extend your precision servo drive by up to 75cm. 3-pin J / R male to female J / R / Futaba.

SwitchPilot 3 decoders are optimized for stationary use on your layout and can switch conventional double-coil turnout drives, light signals, magnetic decouplers, light bulbs or other stationary consumers. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 is multi-protocol capable and can be used with central

SwitchPilot 3 Plus decoders are optimized for stationary use on your layout and can switch conventional double-coil turnout drives, light signals, magnetic decouplers, light bulbs or other stationary consumers. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Plus is multi-protocol capable and can be use

SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo is multi-protocol capable and can be used with central units based on the Märklin® Motorola® system (e.g. 6021, Central Station

The compact SwitchPilot 3 Mini Decoder is designed for stationary use in hard-to-reach places on your layout and can switch a double-coil turnout drive or two magnetic uncouplers or a two-aspect light signal or two light bulbs or other stationary loads.The SwitchPilot 3 Mini features an innovative operating concept, consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Mini is multi-protocol compatible and can be used with both Märklin® Motorol

The compact SwitchPilot 3 Servo Mini decoder is designed for stationary use in hard-to-reach areas of your layout and can control an RC servo drive. The SwitchPilot 3 Servo Mini features an innovative operating concept consisting of a 4-line, backlit OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo Mini is multi-protocol compatible and can be used with both Märklin® Motorola® control units (e.g., 6021, Central Station®, or Mobile Station®) and DCC-compatible control un

Operating modes: DCC, Motorola® with up to 127 addresses, K83 compatible, supply by the digital central unit or separate DC or AC voltage transformer up to 18V AC. Outputs: 16 outputs, each with 250mA loadable, connection with removable terminal blocks, version as push / pull stage: The outputs can be switched individually against decoder ground or positive voltage, individual assignment of the decoder addresses to the outputs (mapping), lighting effects, brightness individually adjustable , Cro

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color white.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color violet.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color black.

ESU 51943 – RED Super thin cable, 0.5mm diameter, AWG36, 10m bundle