ESU 50444 – Loudspeaker 40mm, round, 100 Ohm, with sound chamber

Lautsprecher 57mm rund 16 Ohm with Schallkapsel for Decoder LokSound XL

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

ESU 50447 – Two loudspeakers 16mm, oval, je 50 Ohm, with sound chamber

ESU 50448 – Loudspeaker 20mm x 40mm, square, 100 Ohm, with sound chamber

Rapido 50601 HO EMD SD7 High Nose - ESU LokSound und DCC Bessemer & Lake Erie | Zustand: New

Rapido 50603 HO EMD SD7 High Nose - ESU LokSound und DCC Bessemer & Lake Erie | Zustand: New

Rapido 50605 HO EMD SD7 High Nose - ESU LokSound und DCC D&RGW 5300 | Zustand: New

Rapido 50609 HO EMD SD7 High Nose - ESU LokSound und DCC EMD #991 | Zustand: New

Rapido 50611 HO EMD SD7 High Nose - ESU LokSound und DCC SP #5322 | Zustand: New

Rapido 50613 HO EMD SD7 High Nose - ESU LokSound und DCC SP #5331 | Zustand: New

Rapido 50620 HO EMD SD9 Low Nose - ESU LokSound und DCC C&NW 6608 | Zustand: New

Rapido 50622 HO EMD SD9 Chicago, Burlington & Quincy #831 ESU LokSound DCC/Sound | Zustand: New

Rapido 50625 HO EMD SD7 High Nose - ESU LokSound und DCC CB&Q #840 | Zustand: New

Rapido 50637 HO EMD SD10 Low Nose ESU LokSound und DCC DM&E #549 | Zustand: New

Interior lighting set with taillight, 255mm, 11 LEDs, "Warm White". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

The 380mm long, 15mm wide wagon interior lighting with the article number 50703 is intended for use in track-1 vehicles. It carries both white and yellow LEDs, which are separately adjustable in brightness. This allows you to set the desired color for the first time. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. Thanks to the digital interface (21MTC), a function decoder can be retrofitted at any time.

Model: small, easy-to-install module for the driver's cab. Consisting of a single warm white LED and control electronics.

Model: small, easy-to-install module for the tail light. Consisting of two red LEDs and control electronics.

The pantographs ensure optimum power consumption on all commercial vehicles. Simply stick it to the underside of the bogie and the preloaded wheel contacts touch the back of the wheel (wheel flange). Because each pantograph has two spring plates, one per axis. Suitable for all center distances. Suitable for H0 DC and AC or N-lane. Set with 8 pantographs is enough for 8 axles.

ESU 50708 – Digital LED lighting strip with integrated Digital decoder and taillight, 255mm, 11 LEDs, „warm-white“

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. The integrated ESU decoder can be used under Motorola® and DCC and also works on analog

The PowerPack supercapacitor can be connected to the 50700, 50702, 50708, and 50709 indoor lighting to reliably prevent low power flicker. Capacity 0.22F / 5.5V.