This design of the adapter board contains voltage regulators for a functional low voltage of 5 V. With the aid of the 5 V voltage, for example, servos CAN be operated.Adapter board for PLUX22 Decoder, the Decoder is plugged into the socket strip of the adapter. About large solder pads, the wiring within the locomotive CAN be made comfortably, whereby the connections (plus lines) common for a variety of devices (plus lines) are multiply. The AdapLu adapter board is equipped with a rectifier that

Adapter board for connecting PluX22 decoders to special 21MTC boards that require 5 V levels at the logic level outputs.Only required for special 21MTC locomotive boards - e.g., Sudexpress Eurodual, Stadler BR 159, LS Models BR 120, or LS Models BR 184 (reissues from 2023) - to use a PluX22 decoder (only MX633P22, MX635P22, MN330P22, MS450P22 - NOT MX645P22)New Revision C from July 2023: RevC suitable for Sudexpress Eurodual, Stadler BR 159, LS Models BR 120, and LS Models BR 184.16.8 mm x 19.5

Adapter board for US models (Athearn, Kato, U.V.A ..), for PLUX16 and PLUX22 Decoders. The Decoder is plugged into the socket bar of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable.The Adapus adapter board CAN be used with Decoders equipped with 16 V energy storage connection. Not allowed is the use of adapus together with MX630P16 and MX648P16!

Adapter board for US models (Athearn, Kato, U.V.A ..), for PLUX16 and PLUX22 Decoders. The Decoder is plugged into the socket bar of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable.These versions of the adapter board contains voltage regulators for a functional low voltage of 1.5 V.The Adapus adapter board CAN be used with Decoders equipped with 16 V energy storage connection. Not allowed is the use of adapus together with MX630P16 and MX648P16!

Adapter board for US models (Athearn, Kato, U.V.A ..), for PLUX16 and PLUX22 Decoders. The Decoder is plugged into the socket bar of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable.These embodiments of the adapter board includes voltage regulators for a functional low voltage of 5 V. With the aid of the 5 V voltage, for example, servos CAN be operated.The Adapus adapter board CAN be used with Decoders equipped with 16 V energy storage connection. Not

Adapterplatine für US-Loks zum Decoder MS950

20-pin band cable roll 30m

20-pole tape cable plug for MX696 series

10-pole tape cable plug for MX696S

16-pin bridge plug

22-pin (2 x 11) female strip in raster 1.27 mm, as a mating plug for Decoder with 22-pin or 16-pin PLUX pin strip to pluggle the Decoder in locomas without interface and thus simply make interchangeable. Suitable e.g. For Decoder, which are intended for locomotives with built-in Plux plugs.

6-pin socket strip in grid 1.27 mm, as a mating plug for Decoder with 6-pin pin header (... n, ... f) to pluggle the Decoder in locomas without interface and thus easy to make interchangeable.

8-pin (2 x 4) pin header in the grid 2.54 mm (corresponds to NEM652 plug) to make a R-type t-type normal wired Decoder; e.g. from MX630 MX630R.

12-pin socket strip with crimp connections (also solderable) for AWG22 strands for plugging in large-scale Decoder in pinboard design.

14-pin socket strip with crimp connections (also solderable) for AWG22 strands for plugging in large-scale Decoder in pinboard version.

25 Crimp socket strips Criovs12 + Crimp tool

25 Crimp socket strips Criovs14 + Crimp tool

Crimp tool for the ZIMO Crimp socket strips.

Digitally switchable coupling H0E for single tractions. All H0E couplings are suitable for H0E cars with a stern shaft.Technical data: Voltage: 12-22V DC, maximum current: 90mA, maximum load duration: 10 seconds, bobbin: brass, mechanics: permanent magnet, clutch recording: H0E, buffer distance: Corresponds to the buffer spacing of common clutches, operating temperature: -20 to 80 ° C . The clutch may be max. 10 seconds are loaded.The Digital clutches allow the uncoupling of cars to free route.

Digitally switchable clutch H0E for double tractions. Matching counterpart: Further H0e-D2 on the second vehicle of the double traction. All H0E couplings are suitable for H0E cars with a stern shaft.Technical data: Voltage: 12-22V DC, maximum current: 90mA, maximum load duration: 10 seconds, bobbin: brass, mechanics: permanent magnet, clutch recording: H0E, buffer distance: Corresponds to the buffer spacing of common clutches, operating temperature: -20 to 80 ° C . The clutch may be max. 10 sec

Digitally switchable coupling for single tractions. Matching counterparts: Roco universal coupling or MK. The non-height-adjustable couplings are suitable for all cars with a standard shaft according to NEM 362. The height-adjustable clutches only need if the car has no standard shaft but a NEM 363 coupling recording.Technical data: voltage: 12-22V DC, maximum current: 90mA, maximum load duration: 10 seconds, bobbin: brass, mechanics: permanent magnet, clutch recording: NEM 362 / NEM 363, buffer

Digitally switchable coupling for double tractions. Matching counterpart: Further MK2 on the second vehicle of the double traction.Technical data: voltage: 12-22V DC, maximum current: 90mA, maximum load duration: 10 seconds, bobbin: brass, mechanics: permanent magnet, clutch recording: NEM 362 / NEM 363, buffer distance: approx. 1.5mm shorter than Roco universal coupling, operating temperature : -20 to 80 ° C. The clutch may be max. 10 seconds are loaded.The Digital clutches allow the uncoupling

Digitally switchable coupling for single units

Zimo DIGIKN/TTD1 Digital Kupplung