Zimo 2POLSTECK-G 2-pol Stecker für MX1 & MXULFA

Zimo 2POLSTECK-K 2-pol Stecker für MX1, MX8, MX9 & MXULFA

Finished CAN bus cable with plugs attached on both sides (also called driving cord) in 15 cm in length. The very short version is specifically suitable for connecting two side-by-side drivers.The Zimo Bus System, based on the industrial-proven CAN protocol, is the most powerful and reliable and reliable under the Digital system bus systems with at least 1000 messages / sec. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connect

Finished CAN bus cable with plugs attached on both sides (also called driving cord) in 10 m in length.The Zimo Bus System, based on the industrial-proven CAN protocol, with at least 1000 messages / sec is the most powerful and reliable under Digital system bus systems. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s.

100 m - collar 6-pin cable (colored wires 0.14 mm, black outer shell, a flat shape).The ZIMO Bus System, based on the industrial-proven CAN protocol, is the most powerful and reliable under Digital system bus systems with at least 1000 messages / sec. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s. The protocol orig

Finished CAN bus cable with plugs attached on both sides (also called driving cables) in 100 cm in length.The Zimo Bus System, based on the industrial-proven CAN protocol, with at least 1000 messages / sec is the most powerful and reliable under Digital system bus systems. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit

Finished CAN bus cable with plugs mounted on both sides (also called driving cord) in 3 m in length.The Zimo Bus System, based on the industrial-proven CAN protocol, with at least 1000 messages / sec is the most powerful and reliable under Digital system bus systems. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s. T

50 pieces 6-pin modular plug (Western Strecker) for mounting.The ZIMO Bus System, based on the industrial-proven CAN protocol, is the most powerful and reliable under Digital system bus systems with at least 1000 messages / sec. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s. The protocol originated from automotive

Finished CAN bus cable with plugs attached on both sides (also called driving cables) in 5 m in length.The Zimo Bus System, based on the industrial-proven CAN protocol, with at least 1000 messages / sec is the most powerful and reliable under Digital system bus systems. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s

Zimo 6POLTRIP CAN-Bus Vierfachverteiler

Installation pliers for stripping the cable and pressing the cable into the plug.

CAN bus cable 8pol 1 m length.

CAN bus cable 8pol 3 m length.

CAN2 special adapter cable Driving cord 1 m length.

CAN2 special adapter cable Driving cables 2 m length.

Adapter board for 21MTC Decoder, the Decoder is plugged into the pin header of the adapter, as AdamtC only with screw terminals. Size: 44 x 26.5 x 6 mm. The adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it.The adapter board CAN be used along with all 21MTC Decoders which are a C-type - therefore MX631C, MX634C, MX638C, MX636C, MX644C, ... and Success Types -Not allowed is the use of MX631D, MX634

This design of the adapter board contains voltage regulators for a functional stress of 1.5 V.Adapter board for 21MTC Decoder, the Decoder is plugged into the pin header of the adapter, as AdamtC only with screw terminals. Size: 44 x 26.5 x 6 mm. The adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it.The adapter board CAN be used along with all 21MTC Decoders which are a C-type - therefore MX631C,

This design of the adapter board contains voltage regulators for a functional stress of 5 V.Adapter board for 21MTC Decoder, the Decoder is plugged into the pin header of the adapter, as AdamtC only with screw terminals. Size: 44 x 26.5 x 6 mm. The adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it.The adapter board CAN be used along with all 21MTC Decoders which are a C-type - therefore MX631C, MX

Adapter board for 21MTC Decoder; The Decoder is plugged into the pin header of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable. The AdamtC adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it. Size: 44 x 26.5 x 6 mmThe adapter board Adamtc CAN be used along with all 21MTC Decoders, which are a C-type - therefore, MX631C, MX634C, MX638C, MX636C, MX644C, ..

This design of the adapter board contains voltage regulators for a functional stress of 1.5 V.Adapter board for 21MTC Decoder; The Decoder is plugged into the pin header of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable. The AdamtC adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it. Size: 44 x 26.5 x 6 mm.The adapter board Adamtc CAN be used along with

This design of the adapter board contains voltage regulators for a functional stress of 5 V.Adapter board for 21MTC Decoder; The Decoder is plugged into the pin header of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable. The AdamtC adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it. Size: 44 x 26.5 x 6 mm.The adapter board Adamtc CAN be used along with a

Adapterplatine mit Next18 und 5 V-Versorgung

Adapter board for PLUX22 Decoder, the Decoder is plugged into the socket strip of the adapter. About large solder pads, the wiring within the locomotive CAN be made comfortably, whereby the connections (plus lines) common for a variety of devices (plus lines) are multiply. The AdapLu adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and outputs more power for it.The AdapLu adapter board CAN be used with PLUX22 Decoders equipped wi

This design of the adapter board contains voltage regulators for a functional stress of 1.5 V.Adapter board for PLUX22 Decoder, the Decoder is plugged into the socket strip of the adapter. About large solder pads, the wiring within the locomotive CAN be made comfortably, whereby the connections (plus lines) common for a variety of devices (plus lines) are multiply. The AdapLu adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and o