Viessmann
Viessmann 6014 linterna de gas unitaria verde / plata con bombilla para escala H0 | Condition: Neu
VIES 6014
H0
desde 1 tiendas
12.90 EUR
Comparación de Precios
| Tienda | Precio | Disponibilidad | |
|---|---|---|---|
|
eBay España
ES
|
12.90 EUR | ✓ En stock | Ir a la tienda → |
Historial de Precios
Viessmann
Viessmann
The MTB MP1 is a motorized switch drive for underfloor mounting. A motor with planetary gears ensures slow, quiet switching movements.The throw can be mechanically adjusted to 3, 6, or 9 mm and adapted to the turnout being used. This makes the drive suitable for various track gauges such as N, TT, H0, H0m, and H0e. Integrated limit switches shut off the motor once the respective end position is reached. The switch blade is held in its position.The power supply is 8 to 16 V AC or DC. Current cons
VIES 1420
Viessmann
The MTB MP4 is a motorized turnout drive with slow, quiet actuation. The throw can be mechanically adjusted to 3, 6, 9, or 12 mm. A detachable connector allows for separate wiring preparation and disconnection of the drive if necessary. Thanks to the modified connection system, the design is slimmer than the MP5.The drive supports two- and three-wire control. In three-wire configuration, it can be used as a replacement for a solenoid drive. A later conversion to two-wire control is possible with
VIES 1421
Viessmann
The MTB MP8 is a pulse-controlled, motorized switch drive. A short control pulse initiates the switching movement, which is then carried out automatically until the end position is reached. The travel distance can be mechanically adjusted to 3, 6, 9, or 12 mm. The footprint is 30 x 42 mm.The drive requires a continuous 9 to 16 V DC power supply for operation. Control is achieved either analogously via pushbuttons or digitally via suitable solenoid decoders with pulse output. Examples include the
VIES 1423
Viessmann
The MTB MP10 is a motorized switch drive with slow switching action and a modified gearbox for increased actuating force. It is specifically designed for heavy switch blades of gauges 0 and 1. Its installation dimensions are the same as those of a tortoise switch, allowing existing mounting holes to be used for replacements.The travel distance can be mechanically adjusted to 3.5, 6, 9, or 12.5 mm. The actuator supports two- and three-wire control and can be switched analogously or digitally. Two
VIES 1424