Todos 🚂 Locomotoras 🚃 Vagones 🚋 Coches de viajeros 🚆 Conjuntos 🛤️ Vías 🔧 Accesorios ⚡ Digital / DCC

Simple point motor decoder for Standard solenoid point motors, 2 wire main track or bus connection minimize wiring. The super easy learning decoder requires no special programing when addressing. This decoder features an easy to use screw terminal block to insert your wires into. There is also a 3 pin harnes to attaches to the Surface Mounted Point Motor but with simple modification it can be fitted to other Solenoid Point Motors. The small switch on the side of the board is for setting the addr

Gaugemaster

Simple point motor decoder for Standard solenoid point motors, 2 wire main track or bus connection minimize wiring. The super easy learning decoder requires no special programing when addressing. This decoder features an easy to use screw terminal block to insert your wires into. There is also a 3 pin harnes to attaches to the Surface Mounted Point Motor but with simple modification it can be fitted to other Solenoid Point Motors. The small switch on the side of the board is for setting the addr

GAUG BPDCC81 · EAN: 5060025808833

H0

desde 1 tiendas

64.90 EUR

♥ Añadir a favoritos 🔔 Crear alerta de precio

Comparación de Precios

Tienda	Precio	Disponibilidad
Modellbahn Union DE	64.90 EUR	✓ En stock	Ir a la tienda →

Historial de Precios

Gaugemaster

Double-track control unit for mounting on a module. This control unit has two rotary knobs for speed control of two separate locomotives and one switch per circuit for controlling the direction of travel. In the center position, the power supply to the track is interrupted.The device requires 16V AC per circuit to supply the track with up to 12V DC operating voltage.Technical data:Input: 2x 16V AC.Output: 2x 12V DC.Maximum current: 1.25A.

Double-track control unit for mounting on a module. This control unit has two rotary knobs for speed control of two separate locomotives and one switch per circuit for controlling the direction of travel. In the center position, the power supply to the track is interrupted.The device requires 16V AC per circuit to supply the track with up to 12V DC operating voltage.Technical data:Input: 2x 16V AC.Output: 2x 12V DC.Maximum current: 1.25A.

desde 97.99 EUR

Vagón Marklin HO 4423 Gaugemaster Special 125 años 1874-1999 lados bajos BC6 | Condition: New

Vagón Marklin HO 4423 Gaugemaster Special 125 años 1874-1999 lados bajos BC6 | Condition: New

desde 29.03 EUR

The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog points is recommended on digital layouts to ensure reliability but this can make extra switching more complicated than it needs to be. There are three solder connections on the board, 2 connections labelled “R” - which should be connected to the rails or bus and 1 connection labelled “F” which can be connected to the frog input wire.

The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog points is recommended on digital layouts to ensure reliability but this can make extra switching more complicated than it needs to be. There are three solder connections on the board, 2 connections labelled “R” - which should be connected to the rails or bus and 1 connection labelled “F” which can be connected to the frog input wire.

desde 26.55 EUR

Simple point motor decoders for standard solenoid point motors, 2 wire main track or bus connection minimize wiring. As two separate units these avoid the need for long wire runs and the super easy learning decoder requires no special programing when addressing.

Simple point motor decoders for standard solenoid point motors, 2 wire main track or bus connection minimize wiring. As two separate units these avoid the need for long wire runs and the super easy learning decoder requires no special programing when addressing.

desde 106.20 EUR