The steam smoke distillate produces a realistic dense, white vapor and evaporates residue-free, without the usual traces in the smoke generator, on locomotives, building roofs or plant surfaces. It is also easy to wipe off with alcohol and will not affect the finish or aging of your models.

This adapter board can be docked to all decoders with an E24 connection and offers a PluX16 interface on the locomotive side. This means that, for example, a LokSound 5 Nano or LokPilot 5 Nano can be easily installed in older locomotives that only have a PluX16 interface (e.g. some Fleischmann H0 locomotives or Piko N or TT locomotives).

Adapter cable, 18-pol. Next18 female to open strands, 88mm, with heat shrink tubing.

Adapter board, 18-pin Next-18 female to NEM651 6-pin, Flex, 88mm, with heat shrink tubing.

Adapter board, 18-pin Next-18 female to NEM652 8-pin, Flex, 88mm, with heat shrink tubing.

Adapter board Next-18 to NEM 658 16-pin PluX16.

The LokProgrammer is the ideal tool for programming all ESU decoders. The LokProgrammer consists of two core components: an interface module, which establishes the physical connection between the PC and the locomotive, and a software component, which runs on every PC under MS Windows. With this combination, it is possible to conveniently set the various features and settings of the ESU decoder. Thanks to the graphical user interface of Windows, the optimal adaptation of a decoder, which so far h

The professional test bench is simply connected to your digital central unit or the LokProgrammer. In addition to a 6-pin NEM 651 interface and an 8-pin NEM 652 interface, there is also a 21MTC NEM660 interface, a PluX22 socket and the Next18 interface. Locomotives without interface connectors can be contacted with single cable clamps. A high-quality bell armature motor with flywheel used in conjunction with direction LEDs to control the engine output. An LED monitor informs you about the functi

The professional test stand V2.0 is supplemented if necessary with the professional test stand extension. Side-docked to the professional test bench V2.0, the large-web decoder can be conveniently tested. LokSound XL with pin headers and the LokSound L decoder are plugged in directly. An LED monitor with 12 LEDs directly indicates the state of all possible physical function outputs. In addition, you can easily connect a second loudspeaker or the sensor inputs to a terminal strip and test them as

This adapter board provides a comfortable connection of your LokSound 5 L or LokPilot 5 L decoder. The decoder is plugged directly into the socket connectors. On the output side, the most important connections can be contacted directly at robust screw terminals - without soldering! A socket for the optional connection of a SUSI module as well as pin headers for the direct connection of four RC servos complete the equipment. This adapter board enables a professional, clean wiring of your locomoti

ESU 53951 Adapterplatine für Hübner Schienenbus

With the help of the BLI Paragon 3/4 (P34) adapter board, H0 tender steam locomotives from Broadway Limited (BLI), in which a Paragon 3 or Paragon 4 decoder was installed ex works, can finally be equipped with a LokSound 5 decoder without much effort. All you have to do is open the tender, remove the standard Paragon 3 or 4 decoder and install the BLI P34 adapter board. All connections can be made exactly as before: The type and position of all plug connections is exactly the same as in the fact

This adapter board can be docked to all decoders with an E24 connection and offers 88mm long strands on the locomotive side. This means, for example, a LokSound 5 Nano or LokPilot 5 Nano can be easily installed in older locomotives.

This adapter board, measuring 54.0 mm x 17.0 mm, features an ESU PowerPack on board. Although the capacitors projecting at the front and rear result in a total length of 70 mm, this adapter board is ideal for converting many American H0 locomotives from Atlas or Athearn, where it replaces the original circuit board. In addition to connection pads for the motor and track, there are also pads for the function outputs AUX1, AUX2, AUX3, AUX4, AUX5, AUX6, AUX7, and AUX8. The series resistors for the

LokPilot V4.0 MM/DCC/SX 21pol. mtc

The new ESU PowerPack Mini can be optionally connected to all ESU decoders of the fourth generation (ie: LokPilot V4.0, LokPilot micro V4.0, LokSound Fx V4.0, LokSound V4.0, LokSound micro V4.0 or LokSound V4.0 M4) and fifth generation (LokSound 5 and LokSound 5 micro) are connected and provides your locomotive with reliable energy when driving over dirt and long routes. Its energy storage (with 1 Farad capacity) will buffer both the noise and light and engine functions, allowing your models to

The new ESU PowerPack Maxi has been developed as a powerful addition to the LokSound L V4.0 / LokSound 5 L, but can also - if space is available - on all LokPilot V4.0, LokSound V4.0, LokSound V4.0 M4 and LokSound 5 and reliably supplies your locomotive with energy when driving over dirt and long routes. Two energy storage devices (5 Farad capacity each) buffer both the sound and lights and engine functions, allowing your models to continue without power for up to 3 seconds, depending on power c

ESU PowerPack MiniXS can be connected to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic) and reliably supplies your locomotive with energy when driving over dirt spots and long switch routes.With the help of its energy storage (with 6 x 0.22 Farad capacity), both the noise and the light and motor functions are buffered, ensuring that your models can continue to drive without power for up to 1.5 seconds, depending on power consumption. This extremely flat module is in

The ESU PowerPack Midi can be connected to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic) and reliably supplies your locomotive with energy when driving over dirt spots and long switch routes.With the help of its energy storage (with 6x1 Farad capacity), both the noise and the light and motor functions are buffered, ensuring that your models can continue to drive without power for up to 3 seconds, depending on power consumption.The PowerPack Midi, which is equipped

ESU 54676 – Smoke unit, Dual Mini (Exhaust + Cylinder) (Gauge 0) for LokSound XL device with electronic board

The new smoke generator "Dual" is suitable for vehicles of the nominal sizes Gauge G, Gauge 1 but also for larger vehicles in Gauge 0. In contrast to the two other smoke generators from ESU, both exhaust steam and cylinder vapor are integrated in one housing. Thus, you can finally retrofit your older locomotives with a realistic cylinder steam. The smoke generator "Dual" has a common tank that can be filled from above. Two separate fan motors with separate heating and temperature elements ensure

ESU 54678 – Smoke unit, small size (Gauge 0) for LokSound XL V4.0 and LokSound 5 XL Decoder or SUSI

ESU 54679 – Smoke unit, big size (Scale G) for LokSound XL V4.0 and LokSound 5 XL Decoder or SUSI

The LokSound 5 Fx is a special feature within the LokSound family: It has no motor output and is specially designed for use in control cars or power cars that require a sound but do not have a model drive themselves. By omitting the motor part, it can still offer all the sound features of the other LokSound 5 members on a size of only 21.5mm x 15.5mm.LokSound 5 Fx decoders are offered with an 8-pin interface according to NEM652 or a 21MTC interface and always come with an 11 x 15 mm "sugar cube"