StayAlive controller with Next18 interface. The STACO2 is designed to equip a model with a Next-18 interface and an energy storage device. A Next-18 decoder can then be plugged onto the STACO2 like an adapter board, which then outputs the decoder connections via 13 soldered wires.Scope of delivery: 1 x STACO2, 14 x 10.4 x 1.9 mm, for controlled charging and discharging of 2 mini gold caps, 13 soldered wires, 2x mini gold caps 0.3 F/2.7 V, 4 x 12 mm (diameter x length), min. 12.5 V - max. 18 V.

StayAlive controller with Next18 interface. The STACO2 is designed to equip a model with a Next-18 interface and an energy storage device. A Next-18 decoder can then be plugged onto the STACO2 like an adapter board, which then outputs the decoder connections via 13 soldered wires.Scope of delivery: 1 x STACO2, 14 x 10.4 x 1.9 mm, for controlled charging and discharging of 2 mini gold caps, 13 soldered wires, 2x mini gold caps 1 F/2,7 V, 6,4 x 9,8 (diameter x length), min. 12.5 V - max. 18 V.

1 x StayAlive controller STACO3A (10x7.3x2mm) for decoders without or with limited provisions for direct energy storage connection. 2 miniature gold caps (solder bridge) can be connected via the two free wires via STACO3A. Suitable for N & TT frame models only.Scope of delivery: 1x STACO3A and 2x mini gold caps, 0.3F/2.7V, 4x12mm.

1 x StayAlive controller STACO3B (10x7.3x2mm) for decoders without or with limited provisions for direct energy storage connection. 2 miniature gold caps (solder bridge) can be connected via the two free wires via STACO3B. Suitable for N & TT frame models only.Scope of delivery: 1 x STACO3B, 2 soldered strands, 2x mini gold cap 1 F/2.7 V, 6.4 x 9.8 mm.

StayAlive Controller, 10 x 7,3 x 1,7 mm

Basic device MX10 + Fahrer MX33 + USB stick + CAN cable + 8Pola1m + power supply NG300 + operating instructions (MX10, MX33)

Base Equipment MX10EC + Race MX33 + USB Stick + CAN cable + 8pola1m + power supply NG300 + operating instructions (MX10, MX33)

Basic device MX10EC + Fahrer MX33FU + USB stick + CAN cable + 8pola1m + power supply NG300 + operating instructions (MX10, MX33)

Basic device MX10EC + Roco WLAN mouse + USB stick + CAN cable + 8Pola1m + power supply NG300 + router + 3x battery + operating instructions. MX10

Basic device MX10 + Fahrer MX33FU + USB stick + CAN cable + 8pola1m + power supply NG300 + operating instructions (MX10, MX33)

Base device MX10 + Fahrer MX33 + USB stick + CAN cable + 8pola1m + power supply NG600 + operating instructions (MX10, MX33)

Basic device MX10 + Fahrer MX33FU + USB stick + CAN cable + 8pola1m + power supply NG600 + operating instructions (MX10, MX33)

Basic device MX10 + Roco WLAN mouse + USB stick + CAN cable + 8pola1m + power supply NG300 + router + 3x battery + operating instructions MX10

Sational Setup Module Stone in track sections equipment, i.: 8 Connections for track sections (up to 8 A, HLU, occupation message, etc.), 16 inputs (sensors, light barriers, contact tracks, ...). Included: approx. 2m 20pol ribbon cable incl. 1x 20pol Crimp plug, 4x 3pol plug Kl., 3pol plug Gr., 2pol plug, instructions adsfsdaf

Stationary setup module Stein in full equipment, ie: 8 connections for track sections (up to 8 A, HLU, occupation message, etc.), 8 connections for switching drives (double coils, motors) or 16 individual outputs, 16 inputs (div. Sensors, light barriers , Contact tracks, ...), 1 I²C bus, 2 speaker outputs, 2 slots for expansion boards. Included: approx. 2m 20pol ribbon cable incl. 2x 20pol Crimp plug, 4pol plug, 4x 3pol plug Kl., 3pol connector Gr., 2pol plug, instructions.

Zimo STEINE8S Erweiterungsplatine für 8 Servo-Antriebe

Zimo STEINE8W Erweiterungsplatine für 8 Weichen

Replacement plug set for stone module (20pol ribbon cable 2m, 2x crimp plug, 1x 2pol St., 4x 3pol St., 1x size 3pol St., 1x 4pol St.)

22-pin pin header, counterpart to 21MTC interface

6-pin pin header NEM651 for converting to a F type

4-pin connection cables between Decoder and SUSI module (also for Mxulfa)

Tantals for "category 2" decoders (with direct energy storage connection), 15 V variant. Usually a larger number of tantals are connected in parallel: at least 5 are recommended, with MX decoders up to 25, with MS decoders unlimited number.

Zimo TANTSOPL Tantal-Kondensatoren 220 ?F/16 V, 30 St.

Zimo TR92-101 Großbahn-Rauchgenerator mit Lüfter